PORTABLE SANDERS AND POLISHERS : PURPOSE AND TYPES
Portable sanders and polishers are used for surface finishing of materials such as metal, wood, ceramics, and plastics. Both tools are Lightweight and fairly easy cooperate.
They can be powered electrically or pneumatically and can be light-duty or heavy duty.
Fig.1 - Portable sanders - Lijadoras portátiles Portable sanders are used to remove paint, rust, corrosion, and imperfections from the surface of workplaces to produce a smooth surface for finishing. Field and machine shop maintenance personnel use the disk-type portable sander (Figure 1). The disk-type portable sander has a high-speed motor that rotates an abrasive disk, wire wheel, or a grinding wheel to prepare a surface for finishing. For sanding, a disk of abrasive paper is mounted with a flexible backing pad on the motor spindle (Figure 2). The basic motor unit is similar to the motor unit used for angle grinding, but with sanding there is no need for a wheel guard. On some models the motor spindle can be locked by depressing a lock button to install or remove the sanding disks. A side handle on the motor housing is used to support the sander during operation. This handle can be removed and screwed into the opposite side of the motor housing for left-handed operation. Pneumatic sanders have an advantage over electric sanders because they are lighter in weight and easier to handle which usually produces a better finished product.
Fig.2 - Portable sanders configurations - Configuraciones de lijadoras portátiles
NOTE: Portable sanders are not intended for use as portable abrasive cutoff saws. The torque for cut off sawing will ruin the soft gearing in the sander motor unit.
Various abrasive disks are used in the operation of the portable electric sander. These disks consist of different abrasive grains that have been bonded or glued onto a cloth or paper disk.
The backing material that supports the abrasive disk is made of a tough vulcanized rubber or fiber that can withstand hard use and constant flexing. Normally, the abrasive grain used on the disk is aluminum oxide, and the bonding agent is glue or special resin. Abrasive disks come in open-coat or closed-coat types, depending on the work to be performed.
The closed-coat disk has the abrasive grains bonded close together, while the open-coat disk has the abrasive grains spaced further apart. Open-coat abrasive disks are used for sanding soft materials that could possibly load up a closed coat disk, for example, wood sanding, removing paint and rust, and plastic. Closed-coat abrasive disks are used for sanding metal, finishing ceramics, and for smoothing rougher sanded areas.
Most portable sanders come with an instruction manual and those accessories that the manufacturer recommends for its use. These accessories can include a sanding setup which includes a flexible rubber backing plate, several types of sanding disks, and the hardware to secure the disk to the motor assembly. Other accessories may include flexible grinding disks with wheel guards, wire wheels, and odd shaped grinding cups with the appropriate wheel guard. Only use accessories approved by the manufacturer to avoid injury or damage to equipment.
The portable polisher (Figure 3) is used to produce a super finish or shine to the workpiece surface. Polishing or buffing a surface is desirable at times to increase smoothness and make the surface easier to clean. By polishing a surface, a workpiece can also be made more wear resistant. Portable polishers are generally more powerful than portable sanders since they encounter a greater frictional resistance when operation, portable polishers operate at slower speeds than in portable sanders so as not to mar the finished surface.
Pneumatic portable polishers are lighter in weight than electric models and may make fewer buffing marks on the finish. In order to improve the surface quality of a workpiece through polishing, it is necessary to use a soft bonnet or cover over the sander backing pad. Lamb's wool polishing bonnets are recommended with a soft rubber cushion pad separating the bonnet and the backing pad. Polishing compound, which is a mild abrasive, is used to help polish the surface. A left- or right-handed side handle is attached to the motor housing to help control the polisher during operations.
OPERATIONS WITH THE PORTABLE SANDER AND POLISHER
Operating the portable sander is difficult due to the rotating force of the disk, so the quality of the work depends mostly on the experience of the machine operator. Hold the portable sander so that the abrasive disk forms an angle of approximately 15° to the workpiece surface (Figure 4). Apply just enough pressure against the sander to bend the sanding pad and abrasive disk so that about 2 inches of the disk contact the surface. Move the sander from side to side, overlapping each path with the next. If the sander cuts irregularly or is hard to control, the sander is most likely at an angle less than the required 15° to the workpiece. If the sander gouges or leaves rough edges, the angle formed by the sander is most likely too great. When the sander is operating, keep it moving back and forth across the workpiece or lift it free to avoid damaging the surface.
Fig. 4 - Correct and incorrect methods of using the electric sander - Métodos correctos e incorrectos de usar la lijadora portátil
The portable polisher looks like the portable sander but it is built with a slower speed and high torque needed for polishing. Polishing is performed by placing the spinning lamb's wool polishing bonnet lightly against the workpiece and moving the polisher lightly back and forth while maintaining a light pressure on the workpiece. Avoid pressing down too hard, or the surface could get damaged. Use separate polishing bonnets for different polishing abrasives, glazes, or waxes. Reapply polishing compound as needed to keep a smooth finish.
|
LIJADORAS Y PULIDORAS PORTÁTILES : PROPÓSITO Y TIPOS
Las lijadoras y las pulidoras portátiles se utilizan para el acabado superficial de materiales tales como metal, madera, cerámica, y plásticos. Ambas herramientas son livianas y bastante maniobrables.
Pueden ser accionadas eléctricamente o neumáticamente y pueden ser de poca potencia o para gran demanda.
Las lijadoras portátiles se utilizan para quitar pintura, óxido, corrosión, e imperfecciones de la superficie de lugares de trabajo para producir una superficie lisa como terminación. El personal de mantenimiento de máquinas de taller o campo utiliza la lijadora portátil tipo disco (figura 1). La lijadora portátil tipo disco tiene un motor de alta velocidad que hace girar un disco abrasivo, un disco de alambre, o una rueda de abrasión para preparar una superficie para su terminación. Para lijado, un disco de esmeril se coloca con un soporte flexible de forro en el eje del motor (figura 2). La unidad de motor básica es similar a la unidad de motor usada para amoladora angular, pero con la lija no hay necesidad de un protector del disco. En algunos modelos el eje del motor puede ser trabado presionando un botón de bloqueo para instalar o para quitar los discos de lija. Una empuñadura lateral en el compartimento del motor es utilizada para soportar la lijadora durante la operación. Esta empuñadura se puede quitar y atornillar en el lado opuesto del compartimento del motor para operación a lado izquierdo. Las lijadoras neumáticas tienen una ventaja sobre las lijadoras eléctricas porque son más livianas en peso y más fáciles de maniobrar lo que produce generalmente un mejor producto final.
NOTA: Las lijadoras portátiles no están destinadas para su uso como sierras abrasivas portátiles de corte. El esfuerzo de torsión para el corte arruinará el delicado engranaje en la unidad de motor de la lijadora.
Varios discos abrasivos se utilizan en la operación de una lijadora eléctrica portátil. Estos discos consisten en diversos granos abrasivos que se han adherido o pegado sobre un disco de paño o de papel.
El material de apoyo que soporta el disco abrasivo se hace de un caucho o de una fibra vulcanizada resistente que puedan soportar un uso exigente y una flexión constante. Normalmente, el grano abrasivo usado en el disco es óxido de aluminio, y el agente adhesivo es pegamento o resina especial. Los discos abrasivos vienen en tipos de estructura abierta o cerrada, dependiendo del trabajo que se realizará.
Fig. 3 - Portable polishers - Pulidoras portátiles
El disco de estructura cerrada tiene los granos abrasivos adheridos en forma cercana entre sí, mientras que el disco de estructura abierta tiene los granos abrasivos con espaciado mayor entre sí. Los discos abrasivos de estructura abierta se utilizan para desbastar materiales suaves que podrían saturar posiblemente un disco de estructura cerrada, por ejemplo, lijado de madera, remoción de pintura y óxido, y plástico. Los discos abrasivos de estructura cerrada se utilizan para lijar metal, cerámica de acabado, y para alisar áreas granuladas más ásperas.
La mayoría de las lijadoras portátiles vienen con un manual de instrucciones y esos accesorios que el fabricante recomiende para su uso. Estos accesorios pueden incluir un equipo de lijado que incluya una placa de apoyo de goma flexible, varios tipos de discos abrasivos, y el conjunto de dispositivos para asegurar el disco al montaje de motor. Otros accesorios pueden incluir discos de pulido flexibles con carcasa protectora de rueda, cepillos de alambre, y vasos de amolar con la carcasa protectora apropiada. Utilice solamente los accesorios aprobados por el fabricante para evitar lesión o daño al equipo.
La pulidora portátil (figura 3) se utiliza para producir un final o un brillo destacado a la superficie del objeto. El pulido o lustre de una superficie es deseable ocasionalmente para aumentar la suavidad y hacer la superficie más fácil de limpiar. Al pulir una superficie, un objeto se puede también hacer más resistente al desgaste. Las pulidoras portátiles son generalmente más poderosas que las lijadoras portátiles puesto que encuentran una mayor resistencia friccional durante la operación, las pulidoras portátiles funcionan a velocidades más reducidas que las lijadoras portátiles para no estropear la superficie acabada.
Las pulidoras portátiles neumáticas son más ligeras en peso que los modelos eléctricos y pueden hacer menos marcas de pulido en el acabado. Para mejorar la calidad superficial de un objeto con el pulido, es necesario utilizar una caperuza suave o una cubierta sobre el plato de lijar o pulir. Los platos de pulido en piel con lana de cordero se recomiendan con una almohadilla de goma suave que separe el plato y el cojín del forro. El compuesto de pulido, que es un abrasivo suave, se utiliza para ayudar al pulimento la superficie. Una empuñadura lateral de izquierda o derecha se fija al compartimento del motor para ayudar a controlar la pulidora durante las operaciones.
OPERACIONES CON LA LIJADORA Y LA PULIDORA PORTÁTILES
El funcionamiento de la lijadora portátil es difícil debido a la fuerza giratoria del disco, así que la calidad del trabajo depende sobre todo de la experiencia del maquinista. Sostenga la lijadora portátil de modo que el disco abrasivo forme un ángulo de aproximadamente 15° a la superficie del objeto de trabajo (figura 4). Aplique sólo la presión necesaria contra la lijadora para doblar la almohadilla para lijar y el disco abrasivo de modo que aproximadamente 2 pulgadas del disco entren en contacto con la superficie. Mueva la lijadora de lado a lado, sobrepasando cada trayectoria con la siguiente. Si la lijadora corta irregularmente o es difícil de controlar, lo más probable es que esté en un ángulo menor que 15° con respecto al objeto. Si la lijadora hace desgastes sin precisión o deja bordes ásperos, el ángulo formado por la lijadora es probablemente demasiado grande. Cuando la lijadora está funcionando, hágala moverse hacia adelante y hacia atrás a través del objeto de trabajo o levántela libremente para evitar dañar la superficie.
La pulidora portátil es parecida a la lijadora portátil pero se construye con una velocidad más reducida y un alto esfuerzo de torsión necesarios para pulir. El pulido es llevado a cabo colocando el plato de pulido con piel de lana de cordero, moviéndolo hacia adelante y hacia atrás mientras que se mantiene una presión ligera en el objeto de trabajo. Evite presionar demasiado, o la superficie podría terminar dañada. Use caperuzas de pulido separadas para diferentes abrasivos, esmaltes, o ceras de pulido. Vuelva a aplicar el compuesto de pulido según lo necesitado guardar un final parejo. |
|
|
|
Chicago Pneumatic CP7255 6-Inch Palm Sander
$149.99
The Chicago Pneumatic CP7255 6-Inch Random Orbit Palm Sander has a 5mm orbit for high quality finishing. With a powerful, low vibration 160 watt motor the CP7255 palm sander makes all your sanding applications easy. Features 3/16-Inch (5mm) orbit produces a high quality finish Powerful 160w (0.21hp) motor ensures consistent power Tear drop handle is comfortable to use and allows for better control Low sound and vibration for more consistent results A color coded ring on the sander makes it easy to tell the CP7255 apart from other CP sanders that have different orbit sizes What's In The Box: Chicago Pneumatic CP7255 6-Inch Random Orbit Palm Sander [Read more]
Store: Tool King
Brand: Chicago Pneumatic
|
Titan 22507 11 Amp 7 Inch Polisher/Sander
$99.99
Titan 22507 7 Polisher/Sander Variable Speed 11 Amp motor Lock-on switch for comfort during extended use Auxiliary handle mounts either side for left or right-hand use. [Read more]
Store: Tool King
Brand: Titan
|
DeWalt DW433K Factory Reconditioned 3 x 21-inch Belt Sander
$109.55
The DeWalt DW433KR Factory Reconditioned DW433K 3-Inch x 21-Inch Belt Sander has the only machined platen in the belt sander industry that ensures flatness and maximum belt contact with the material. The two-position front handle of the DW433K, along with the rubber grip on the read handle, increase user comfort and reduce vibration. Features: Powerful, DeWalt-built 8.0-amp motor aggressively removes material in a variety of applications All-metal housing increases durability Three wheel design delivers lowest center of gravity and longest 3-inch x 21-inch platen available Variable speed dial allows users to optimize belt speed for specific applications Innovative dust collection unit is 20 percent more efficient than conventional dust bags and delivers a break-away design that is durable, efficient and easy to empty Dust collection shut-off eliminates dust stream toward users when collector is not in use Top exit cord allows for easy use of overhead reciptacles What's In The Box: DeWalt DW433R 3-Inch x 21-Inch Belt Sander Dust Bag [Read more]
Store: Tool King
Brand: Dewalt
|
JET 659006K 22-44 Oscillating Drum Sander
$2,099.99
The Jet 659006K 22-44 OSC Oscillating Drum Sander has an exclusive oscillating feature. With the push of a button the 22-44 OSC sander can be operated as a simple sander or as an oscillating sander. When operating as a linear sander, the sander drum rotates as the conveyor feeds the workpiece through. When in the oscillating mode, in addition to the linear sanding operation, the sanding drum head oscillates from left to right and lowers heat build-up on the sanding belt to reduce loading and burning. Features: Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute Patented conveyor belt "Trackers" dramatically reduce the need for manual belt adjustments Sealed and permanently lubricated drum ball bearings for longer life Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results What's In The Box: Jet 659006K 22-44 OSC Oscillating Drum Sander Closed Stand [Read more]
Store: Tool King
Brand: Jet
|
|
Jet 708411 JOVS-10 Oscillating Vertical Spindle Sander, 1 HP, 115-Volt
$1,099.99
The Jet 708411 JOVS-10 Oscillating Vertical Spindle Sander, 1 HP, 115-Volt, Single Phase is loaded with the features that make it an ideal finshing machine for your shop. A sturdy one-piece steel, closed stand houses the powerful, independently mounted, 1HP motor that drives the 1-1/2-inch oscillating drum at a consistent 1725RPM. The Jet 708411 sander comes standard with with a complete set of 10 spindles and abrasive sleeves from 1/4-inch to 4-inch so you can jump right into that next project. Features: 4-inch dust port connects to your dust collection system to keep your work area clean Worm and gear mechanism runs in an oil bath to prolong its life and durability Industrial push-button switch is conveniently located for finger-tip control Table tilts to 45 degrees to accommodate bevel sanding projects Built-in storage racks keep spindles and table inserts handy Sturdy one-piece steel stand provides support and stability Spindles have threaded ends for quick, easy changes What's In The Box: Jet 708411 JOVS-10 Oscillating Vertical Spindle Sander, 1 HP, 115-Volt, Single Phase Set of 10 spindles and abrasive sleeves from 1/4-inch to 4-inch [Read more]
Store: Tool King
Brand: Jet
|
Powermatic 1791293 OES9138 Oscillating Edge Sander
$4,499.99
The Powermatic 1791293 OES9138 is an Oscillating Edge Sander. The Powermatic 1791296 has a 3 Horsepower, 3 Phase, 230/460V Motor. What's In the Box: Powermatic 1791293 OES9138 Oscillating Edge Sander [Read more]
Store: Tool King
Brand: Powermatic
|
General International 15-005 M1 6 X 89-Inch Edge Belt Sander
$1,099.99
General International 15-005 M1 6 X 89-Inch Edge Belt Sander Features: * Heavy-duty enclosed stand for greater stability * Sanding belt operates at any angle from horizontal to vertical * Accurate belt tension and tracking adjustment * Cast-iron table can be adjusted up or down for full belt use * Safety switch with key - Unit cannot be started when key is removed from the switch * Cast-iron miter gauge can be locked in position for quick and easy setup * Adjustable cast-iron miter gauge * Adjustable, removable front table fence * Graphite backing reduces friction for longer belt life Specifications: * Belt Size: 6 x 89-Inches (152 x 2260 mm) * Belt Speed: 3900 Linear FPM (1279 Linear MPM) * Length of Work Area: 33-34-Inches (857 mm) * Dust Chute Outlet: 4-Inches (102 mm) * Front Table Size: 9-78 x 29-58-Inches (250 x 751 mm) * Auxiliary Table Size: 9-78 x 11-78-Inches (250 x 300 mm) * Base Dimensions (l x w): 21-12 x 17-Inches (546 x 432 mm) * Overall Dimensions (l x w x h): 50 x 21 x 49-Inches (1270 x 533 x 1245 mm) * Motor (Pre-Wired 220 V): 1-12 HP, 110/220 V, 18/9 A * Weight: 266-Pounds (121 kg) What's In The Box: * General International 15-005 M1 6 X 89-Inch Edge Belt Sander [Read more]
Store: Tool King
Brand: General International
|
Delta 31-396 6-Inch Oscillating Edge Sander
$2,499.99
Features: * Powered by a 3 HP, 220V 1 Phase Motor * Idler roller can be used for edge sanding of irregular shapes * Quick-release belt tensioning for easier belt changing * Front cast-iron sanding table can be moved up and down, forward and backward * Adjustable head from 0-90 with detent stops at 0, 45, 90 * Spindle sanding kit with three sizes of drums and collars for contour sanding * Graphite sanding platen can tilt from 0-90 or any angle in between Specifications: * Motor: 3 HP, 220V, 1 Phase, 1, 720 RPM * Abrasive Belt Size: 6 x 108-Inches * Speeds: Belt speed: 3, 150 FPM * Table Size: Front Table Size: 35-3/8 x 12-Inches * Auxiliary Table Size: 11-3/8 x 8-7/8-Inches * Miter Gauge Groove: 3/8 x 3/4-Inch * Table Tilt: Table move: 3-1/2-Inches up, 4-3/4-Inches forward; Platen Tilts: 0 to 90-Degrees * Dust Port Diameter: 4-Inches * Sanding Drum: Diameter: 1-1/2, 2, 3-Inches; Long: 4-1/2-Inches * Dimensions (W x L x H): 27.5 x 60.625 x 47.75-Inches * Weight: 500-Pounds What's In The Box: * Delta 31-396 6-Inch Oscillating Edge Sander * Spindle Sanding Attachments: 1-1/2 x 2-Inches, 3-Inch Diameter, Drums with Collar Inserts * Heavy Gauge Steel Fence * miter Gauge * Allen Wrench * Hardware [Read more]
Store: Tool King
Brand: Delta
|
|
Shop Fox W1710 24-inch Widebelt Sander with Single-Phase Motor and Dig
$8,653.33
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. Specifications: * Sanding Motor: 10 HP, 220V, 50 Amp, Single-Phase * Sanding Motor Speed: 1, 725 RPM * Feed Motor: 1 HP, 220V, 7 Amp, Single-Phase * Feed Motor Speed: 1, 725 RPM * Elevation Motor: 1/3 HP, 220V, 3 Amp, Single-Phase * Elevation Motor speed: 1, 725 RPM * Drum Speed: 3, 550 FPM * Drum Diameter: 7-7/8-Inches * Feed Rates: 14-3/4-49 FPM * Maximum Sanding Width: 24-Inches * Maximum Sanding Thickness: 6-Inches * Minimum Stock Length: 10-Inches * Minimum Stock Thickness: 1/8-Inch * Required Air Pressure: 57 PSI @ 7 CFM * Belt Size: 25 x 60-Inches * Dust Port: Two 4-Inch Ports * Footprint (W x D): 39-1/4 x 19-1/4-Inches * Height with Dust Ports: 71-Inches What's In The Box: * Shop Fox W1710 24-inch Widebelt Sander with Single-Phase Motor and Digital Readout [Read more]
Store: Tool King
Brand: Shop Fox
|
Powermatic 1791282 OES9138 Oscillating Edge Sander, 3 HP, 1 Phase, 230
$4,499.99
Powermatic 1791282 OES9138 Oscillating Edge Sander, 3 HP, 1 Phase, 230V [Read more]
Store: Tool King
Brand: Powermatic
|
Festool 493915 RO 150 FEQ Rotex Sander Stickfix Sanding Pad Hard
$38.00
The Festool 493915 FastFix Hook & Loop Hard Sanding Pad works with the Festool RO 150 FEQ Dual-Mode Sander. It will give you coarse sanding results with minimal time and effort. Features: Sanding pad for sanding, smoothing, and shaping with the RO 150 FEQ Sander. What's In the Box: 6" FastFix Hook & Loop Hard Sanding Pad [Read more]
Store: Tool King
Brand: Festool
|
Safety Speed Cut WBATABLE Power Table Lift for 4375 Wide Belt Sander
$999.99
Safety Speed Cut WBATABLE Power Table Lift for 4375 Wide Belt Sander [Read more]
Store: Tool King
Brand: Safety Speed Cut
|
|
Shop Fox W1686 Oscillating Spindle Sander
$866.67
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. No expense has been spared to bring you this feature packed spindle sanding monster! With a whopping 27-1/2 x 27-1/2-inch precision-ground cast iron table, no other machine comes close to Shop Fox in size and capacity. The heavy-duty trunnion assembly will effortlessly support your heaviest oversized workpieces and the 1 HP motor will gracefully sculpture the hardest woods. Built for everyone from the demanding shop boss to the amateur who has it all, the Shop Fox W1686 will without a doubt meet the highest of expectations! Features: * Stand: Cabinet style, powder coated paint * Dust port: 4" opening * Steel table inserts * 100 grit sanding sleeve for each spindle Specifications: * Motor size: 1 HP, 110/220V, TEFC motor * Table: Precision-Ground Cast Iron, 27-1/2 x 27-1/2-Inch * Ten sSpindle Sizes: 1/4 x 5-Inch, 3/8 x 6-Inch, 1/2 x 6-Inch, 5/8 x 6-Inch, 3/4 x 9-Inch, 1 x 9-Inch, 1-1/2 x 9-Inch, 2 x 9-Inch, 3 x 9-Inch, 4 x 9-Inch, Tapered and Threaded * Table Height: 35-1/2-Inches * Table Tilt: 45 Front and 20 to the Back * Spindle Speed: 1, 725 RPM * Oscillation Speed: 72 SPM * Stroke Length: 1-1/2-Inch What's In The Box: * Shop Fox W1686 Oscillating Spindle Sander [Read more]
Store: Tool King
Brand: Shop Fox
|
Delta 31-120 12-inch Disc Sander with Integral Dust Collection
$228.60
The Delta 31-120 12-Inch Disc Sander with Integral Dust Collection is perfect for smooth, efficient, free-hand sanding. The 31-120 lets you smooth and shape irregularly-shaped objects in a dust-free environment thanks to the integrated dust collection fan and hose. The hose on this Disc Sander can be attached to any standard shop vacuum for cleaner sanding operation resulting in less clean-up time and cleaner breathing air. The 31-120 Disc Sander has a cast-iron table that tilts with positive stops at 45 and 90 degrees for repeatable sanding tasks and a 1/2-horsepower motor to get it all done quickly and easily. Features: Induction-type motor for long-lasting, smooth performance Manual brake stops sanding disc in seconds Heavy-duty, steel disc plate features a 12inch diameter, 80-grit abrasive disc for fast, efficient sanding Tilting cast-iron table with 90- and 45-degree positive stops locks in position with spring-loaded, table-locking handles Cast-iron base with pre-drilled base holes for easy bench mounting Dust hose has connector with 2-1/4-inch outside diameter to attach quickly to any standard shop vacuum Integral dust collection fan draws dust away from table and into hose for cleaner sanding operation 3/8-inch x 3/4inch miter gauge slot machined into the table for projects that require sanding an angle or straight edge What's In The Box: Delta 31-120 12-Inch Disc Sander Dust Collection Hose 12-Inch 80-Grit Abrasive Disc Wrenches [Read more]
Store: Tool King
Brand: Delta
|
Flex 318671 600 Grit Sanding Fleece for Finger Belt Sander (3 Pack)
$19.99
The Flex 318655 is a pack of 3 Sanding Fleece for LBS1105VE Finger Belt Sander. The 9 mm continuous sanding fleece fits 9 mm sanding arm. [Read more]
Store: Tool King
Brand: Flex
|
Porter-Cable 343VSK 5-Inch Random Orbit Sander
$69.55
The Porter-Cable 343VSK 5-Inch Variable-Speed Random Orbit Sander Kit has variable speed control (7000 - 12000 OPM) which enables users to adjust the proper pad speed for various applications. Features: 3.0 Amp motor for power and durability in a professional setting Porous polyethylene dust canister is more durable than cloth dust bags Improved ergonomics with rubber top grip for more comfort Top cap design allows user to service or clean out the unit quickly and easily Dual dust ports accept both 1-Inch and 1-1/2-Inch vacuum hose attachments Variable speed dial (7, 500 - 12, 000 OPM) gives the user control of removal rate on a variety of materials What's In The Box: Porter-Cable 343VSK 5-Inch Random Orbit Sander Carrying Case [Read more]
Store: Tool King
Brand: Porter Cable
|
|
Makita 9031 1-1/8 x 21-Inch Variable Speed Belt Sander
$215.55
The Makita 9031 is a 1-1/8 x 21 inch Variable Speed Belt Sander. The variable speed belt sander is compact and lightweight (4.6 lbs) for use in close quarters. The belt speed can be adjusted between 656 and 3280 ft-min for use with a wide variety of materials and the narrow belt and exposed front pulley make working in confined spaces or on irregular shapes an experience in maneuverability. The ball and needle bearing construction ensure smooth operation and long tool life. The multi-position side handle of the Makita 9031 makes for easy and comfortable operation and the lock-on button makes extended use a breeze. Features: Compact and lightweight (4.6 lbs.) for close quarter work with excellent maneuverability Ball and needle bearing construction for smooth operation and long tool life Narrow belt and exposed front pulley for use in close quarters or on irregular shapes Multi-position side handle for easy and more comfortable operation Lock-on button for continuous operation What's In the Box: Makita 9031 1-1/8 x 21-Inch Variable Speed Belt Sander [Read more]
Store: Tool King
Brand: Makita
|
Flex 258888 30 mm Finger Belt Sander Large Roll Sanding Arm
$94.99
The Flex 258888 is a 30 mm Large Roll Sanding Arm for LBS 1105 VE Finger Belt Sander. The arm pivots 100 for hard to reach areas, angles and tight spaces. The Flex 258888 is mostly used for pipes and curves. The application cases are sanding weld seams on pipes, sanding down radii & transitions and deburring. Features: Designed for use with the LBS 1105 VE Finger Belt Sander Pivots 100 degrees to reach tight spaces and angles. What's In the Box: Flex 258888 30 mm Finger Belt Sander Large Roll Sanding Arm [Read more]
Store: Tool King
Brand: Flex
|
Powermatic 1790843 WB-43 43-in Wide Belt Sander, 25 HP 3 Phase, 230-46
$19,999.99
Powermatic 1790843 WB-43 43-in Wide Belt Sander, 25 HP 3 Phase, 230-460V [Read more]
Store: Tool King
Brand: Powermatic
|
Jet 628900 10 x 20-Inch Benchtop Drum Sander
$679.99
The Jet 628900 is a 10 x 20-Inch Benchtop Drum Sander. The Jet Performax Sander will sand boards measuring up to three inches thick and 20 inches wide, while the aluminum, self-cooling drum protects the sanding surface from heat damage. Whether you're a hobbyist or a craftsperson with a smaller-sized home shop, this Benchtop Drum Sander is ready to tackle all your woodworking projects. Features: 1 HP motor for fast stock removal 4-Inch dust port for easy collection Large hand wheel for easy adjustment 20 inches wide capacity for sanding larger surfaces Quick paper change for less downtime and more productivity What's In the Box: Jet 628900 10 x 20-Inch Benchtop Drum Sander [Read more]
Store: Tool King
Brand: Jet
|
|
Porter-Cable 7345 5-Inch Random Orbit Sander
$139.99
The Porter-Cable 7345 5-Inch Random Orbit Sander is a lightweight yet powerful 5-Inch sander. Weighing in at just over 5-Pounds and using a 4.5 Amp motor this sander is sure to get the job done. Features: Electronic variable-speed dial adjusts from 2, 500-6, 800 OPM Random orbit, swirl-free sanding action for smooth results Includes 5-Inch proprietary counter balance for use with 5-Inch sanding/polishing pads Accepts accessories using 5/16-24 spindle thread Features two-position (left or right) removable side handle for greater comfort and control Compact lightweight design - 5-1/2 pounds 100% ball and roller bearing construction What's In The Box: Porter-Cable 7345 5-Inch Random Orbit Sander 5-inch PSA Pad Sanding Disc Two Position Side Handle Wrench [Read more]
Store: Tool King
Brand: Porter Cable
|
General International 15-220 M1 Bench Top Oscillating Spindle Sander
$429.99
The General International 15-220 M1 Bench Top Oscillating Spindle Sander is made of durable, ground cast-iron and features five interchangeable spindle assemblies and four table inserts to accommodate different spindle sizes. The 15-220 M1 is the perfect addition to any small workshop. Features: Rotating & oscillating functionality ensures exceptional finishing results Precision ground cast iron table is extremely durable On-board side mounted spindle storage for easy access to different spindle sizes Tilting table for sanding beveled pieces 2-Inch diameter dust outlet with 2-Inch to 4-Inch adapter fitting included Five interchangeable spindle assemblies: 1/4, 1/2, 5/8, 1-1/2, and 2-Inch diameters with 100 grit sandpaper 1-1/2 & 2-Inch spindles come with rubber drums Includes four table inserts to accomodate the different spindle sizes Compact design is easy to move and doesn't take up much space for storage What's In The Box: General International 15-220 M1 Bench Top Oscillating Spindle Sander 1/4, 1/2, 5/8, 1-1/2, and 2-Inch Diameter Spindles with 100 Grit Sandpaper [Read more]
Store: Tool King
Brand: General International
|
Powermatic 1790825 WB-25 25-Inch Wide Belt Sander
$9,999.99
The Powermatic 25-Inch Wide Belt Sander delivers the utmost performance in measurement and sanding, creating a flawless finish every time. The Sander has centralized controls which allow the user to access all the needed buttons on one simple panel for more convenience. The variable speed feed belt allows the user to accurately dial in the exact feed speed to best suit each project and work environment. The sander also features a special digital readout control. This element is especially helpful because it will show the exact thickness of the finished piece or will allow the user to preset exactly what thickness they would prefer the finished piece to be. The sander also includes a unique measuring device, the auto thicknesser, that will capture the piece of wood to give the user an exact measurement of the starting thickness. The Powermatic Wide Belt Sander has an air-eye system which controls the oscillation for the 25 x 75-Inch sanding belt. This prevents the belt from running off the end of the drums and uses the sanding surface in a more uniform manner. This also ensures sanding lines will not be left on the work piece. The sander also has a powerful three motor system for maximum performance. The first motor system allows for maximum horsepower to feed the drive drums. A second, smaller motor, directly powers the VS feed belt and a third, smaller motor, powers the feed table up and down to the desired thickness automatically and with ease. For safety, the WB-25 Sander has a disc brake, which slows the machine quickly and stops it instantly in the event of an emergency. Features: Centralized controls allow you to access all the needed buttons on one simple panel The auto thicknesser will capture the piece of wood to give the user the exact starting thickness The variable speed feed belt allows you to accurately dial in the exact feed speed to best suit your project Digital readout will show the user the exact thickness of the finished piece, or will allow y... [Read more]
Store: Tool King
Brand: Powermatic
|
Delta 31-260X 18 x 36-inch 1-1/2HP Drum Sander
$1,099.99
Equipped with a 1.5HP two-speed motor, the new Delta X5 31-260X Drum Sander is capable of 2, 210 or 3, 300 surface feet per minute (SFPM) with both 5-80 or 4-120 grit sanding wraps included. An outboard shaft, designed to accommodate accessory pneumatic drums for contoured sanding, pairs with the 31-260Xs rigid C-framed head for superior parallelism and stability. Front mounted motor control and thickness gauges, along with a larger hand wheel, have been redesigned for easier adjustments and less downtime during use. In addition, the 31-260X is designed with an enclosed cabinet base for dampening vibrations and smoother sanding. The enclosed base protects the motor from fine dust and impact and includes user installed storage shelving space for additional sand wraps. For dust and debris collection, the 31-260X features a four-inch dust collection port with locking seals for removal of harmful materials. The 31-260X unit can be integrated with the full line of Delta dust collection units for unsurpassed filtration and healthier working environments. The Delta 31-260X 18 x 36-Inch Drum Sander is covered by a 5 Year Manufacturer Warranty. Features: Outboard shaft accommodates accessory pneumatic drums for contour sanding The 31-260X has a rigid, welded C-frame head assembly that eliminates loose movement in the sanding drum resulting in superior parallelism of the work piece Large sturdy steel cabinet style base dampens vibration for super smooth finish sanding. The cabinet style base easily converts to a user-installed "Woodworker's Pantry" for sandpaper roll storage. Blow-molded integral dust hood with a positive lock secure seal is designed to extract dust from the entire drum without letting dust escape, keeping your shop air clear of harmful fine dust Up-front, motor controls and redesigned easy-to-read thickness gauge for accurate finish sanding. Large paddle type on/off switch for operator convenience and safety. Single-piece, cast-iron table constr... [Read more]
Store: Tool King
Brand: Delta
|
|
JET G-6DCK, 6"" x 48"" Belt / 12"" Disc Sander with Open Stand
$999.99
JET G-6DCK, 6" x 48" Belt / 12" Disc Sander with Open Stand [Read more]
Store: Tool King
Brand: Jet
|
Chicago Pneumatic CP7202D Mini Pneumatic Disc Sander Kit
$109.99
The Chicago Pneumatic CP7202D Mini Disc Sander Kit is great for rust removal, surface preping and general auto body applications. The compact and lightweight design of the CP7202D Polisher makes it easy to maneuver in confined spaces and also offers better control with less user fatigue. Features: Compact and lightweight dessign allows for easy access in tight areas Rubber molded palm grip for added comfort and control Adjustable power regulator ensures precision results Two finger throttle for increased control and less fatigue Handle exhaust port reduces noise and directs air away from work area What's In The Box: Chicago Pneumatic CP7202D Mini Pneumatic Disc Sander Kit One 3-Inch Backing Pad Ten Each of 3-Inch 80, 100 and 120 Grit Sanding Discs One 3-Inch Fine, Medium and Coarse Surface Prep Discs Spindle Wrench Packed Heavy Duty Plastic Carrying Case [Read more]
Store: Tool King
Brand: Chicago Pneumatic
|
Powermatic 1791291K 31A 6-1/2-inch Belt and Disc Sander, 1-1/2HP, Sing
$1,449.99
The Powermatic 1791291K 31A 6-1/2-inch Belt and Disc Sander, 1-1/2HP, Single Phase is loaded with features that allow the Powermatic 31A tackle the most demanding tasks. Full cast iron construction allows both metal and woodworking to be done on the same machine and the integral dual dust port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6-inch x 48-inch belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45 and 90 degrees and the head lock allows use at any angle in-between. and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle. Features: Multi-position belt head locks at any angle from 0 to 90 degrees and includes indexing pin for 0, 45 and 90 degree stops Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support Belt table tilts down to 45 degrees and can be set for beveled and mitered angle sanding Belt and disc tables are precision ground cast iron with miter slots 12-inch disc is balanced for flat, even coverage What's In The Box: Powermatic 1791291K 31A 6-1/2-inch Belt and Disc Sander, 1-1/2HP, Single Phase [Read more]
Store: Tool King
Brand: Powermatic
|
Porter-Cable 7800 Factory Reconditioned Long Reach Drywall Sander
$369.99
Porter-Cable 7800R Factory Reconditioned Long Reach Drywall Sander works in a speed range of 1400 rpm to 2000 rpm that is well suited for most sanding operations. The foam-backed abrasive sanding pads of the drywall sander hardly leave any swirl marks behind and ensure excellent results. The Porter-Cable Long Reach Sander is an efficient tool used to complete drywall sanding jobs in record time. The Porter-Cable 7800 Drywall Sander is a major time saver as it gets the task of drywall sanding done about 3 to 4 times quicker than traditional hand sanding methods. Most sanding jobs leave behind a trail of dust that makes cleaning up very cumbersome. However, this power tool has a static-dissipating 1-1/4-inch vacuum hose to collect even fine dust. The vacuum hose is 13 feet in length and you can cover a considerable area. Porter-Cable 7800 is lightweight weighing only 8 pounds to reduce fatigue during long hours of use. Features: 4.7 Amp motor for efficient sanding action Variable-speed 1400 to 2000 RPM to match the application Finish sands drywall joints three to four times faster than conventional methods Sands with minimal clean up when used with vacuum for dust collection What's In The Box: Porter-Cable 7800R Drywall Sander Sanding Pad 13-Foot Static-Dissipating 1-1/4-Inch Vacuum Hose Hook & Loop Straps for Mounting Power Cord to Vacuum Hose Operating Manual [Read more]
Store: Tool King
Brand: Porter Cable
|
|
Bosch 1250DEVS 6-Inch Dual-Mode Electronic Random Orbit Sander / Polis
$259.60
The Bosch 1250DEVS is a 6-Inch Dual-Mode Variable-Speed Random Orbit Sander/Polisher. The sander with Turbo Action has a 6.5 Amp motor. The dual mode selector allows to quickly switch between aggressive rough sanding and fine swirl-free sanding applications. The variable speeds between 3100-6650 OPM mean quick and controlled stock removal. Constant response circuitry provides soft start and extended gear life. A Micro-cellular backing pad conforms to surfaces for fine finishes. It includes a micro-cellular backing pad, a dust tube, an auxiliary handle, sanding disc and pad wrench. Two other types of backing pads are available separately. Features: Multipurpose sander wit two sanding modes. Random orbit mode for normal stock removal or fine finishing and Turbo driven eccentric orbit mode for aggressive stock removal at 5X random orbit sander removal rate Mode selector switch - Quickly change between random orbit mode and Turbo mode Powerful 6.5 Amps with variable-speed dial (3, 100-6, 650 OPM) - To match speed to workpiece and task Soft-Start - Reduces start-up torque Constant Response Circuitry - Maintains pad speed under heavy loads and protects against overloads High-performance Microcellular Backing Pad - Conforms to contours, provides a fine finish Integral pad dampening System - Helps prevent swirl marks for consistent fine finish Rugged Die-cast Aluminum Gear Housing with exclusive dual-bearing pad mount - Long life design eliminates wobble and vibration Tapered Soft-Grip Top, plus ergonomic handles Passive dust collection system - Vacuum cleaner and hose required - accepts Bosch VAC001, VAC009 and VAC010 hoses or VAC002 hose adapter Uses 6-Hole 6-Inch hook and loop discs - Compatible with industry standard discs What's In The Box Bosch 1250DEVS 6-Inch Dual-Mode Electronic Random Orbit Sander / Polisher Dust Tube 2601328072 Soft Backing Pad RS6045 Ambidextrous Auxiliary Handle 2602025067 Pad Wrench, 5mm (stored on tool) 1907950006 Sanding Disc [Read more]
Store: Tool King
Brand: Bosch
|
Chicago Pneumatic CP7225 6-Inch Palm Sander
$139.99
The Chicago Pneumatic CP7225 6-Inch Random Orbit Palm Sander has a 3/32-Inch (2.5mm) orbit for fine finish sanding. With a powerful, low vibration 160 watt motor the CP7225 palm sander makes all your sanding applications easy. Features 3/32-Inch (2.5mm orbit produces a high quality finish Powerful 160w (0.21hp) motor ensures consistent power Tear drop handle is comfortable to use and allows for better control Low sound and vibration for more consistent results A color coded ring on the sander makes it easy to tell the CP7225 apart from other CP sanders that have different orbit sizes What's In The Box: Chicago Pneumatic CP7225 6-Inch Random Orbit Palm Sander [Read more]
Store: Tool King
Brand: Chicago Pneumatic
|
Powermatic DS20 Disc Sander 1791264
$2,199.99
Powermatic DS20 Disc Sander 1791264 [Read more]
Store: Tool King
Brand: Powermatic
|
Drum Sanding Roll 3" x 95" 80 Grit
$16.50
Fits Platinum Series 16/32 Drum Sander. [Read more]
Store: Laguna Tools
|
|
Drum Sanding Roll 3" x 95" 150 Grit
$13.50
Fits Platinum Series 16/32 Drum Sander. [Read more]
Store: Laguna Tools
|
Drum Sanding Roll 3" x 95" 100 Grit
$13.50
Fits Platinum Series 16/32 Drum Sander. [Read more]
Store: Laguna Tools
|
20" Sanding Disk 80 Grit
$28.00
20" Sanding Disk for Platinum Series 20" Disk Sander with Stand. [Read more]
Store: Laguna Tools
|
Sanding Belt 6" x 99" 120 Grid
$32.00
Fits Platinum Series Oscillating Edge Sander. [Read more]
Store: Laguna Tools
|
|
20" Sanding Disk 120 Grit
$27.00
20" Sanding Disk for Platinum Series 20" Disk Sander with Stand. [Read more]
Store: Laguna Tools
|
20" Sanding Disk 100 Grit
$27.00
20" Sanding Disk for Platinum Series 20" Disk Sander with Stand. [Read more]
Store: Laguna Tools
|
Sanding Belt 6" x 99" 80 Grit
$33.50
Fits Platinum Series Oscillating Edge Sander. [Read more]
Store: Laguna Tools
|
Sanding Belt 6" x 99" 280 Grit
$35.00
Fits Platinum Series Oscillating Edge Sander. [Read more]
Store: Laguna Tools
|
|
Sanding Belt 6" x 99" 220 Grit
$35.00
Fits Platinum Series Oscillating Edge Sander. [Read more]
Store: Laguna Tools
|
Sanding Belt 6" x 99" 150 Grit
$32.00
Fits Platinum Series Oscillating Edge Sander. [Read more]
Store: Laguna Tools
|
6'' Stickit Gold P180 Grade Sanding Discs- 75 Disc Roll
$35.95
? Durable and longer lasting disc product. ? Discs have pressure-sensitive adhesive for easy application and removal. By 3M Automotive Products. [Read more]
Store: AutoBarn.com
|
Drum Sanding Roll 3" x 95" 120 Grit
$13.50
Fits Platinum Series 16/32 Drum Sander. [Read more]
Store: Laguna Tools
|
|
Sanding Belt 6" x 99" 400 Grit
$35.00
Fits Platinum Series Oscillating Edge Sander. [Read more]
Store: Laguna Tools
|
12" Sanding Disk 80 Grit
$7.00
Fits Platinum Series 12" Disk Sander. [Read more]
Store: Laguna Tools
|
12" Sanding Disk 60 Grit
$7.00
Fits Platinum Series 12" Disk Sander. [Read more]
Store: Laguna Tools
|
12" Sanding Disk 120 Grit
$7.00
Fits Platinum Series 12" Disk Sander. [Read more]
Store: Laguna Tools
|
|
Sanding Belt 6" x 118" 60 Grit
$36.00
Fits KSM 3000 Edge Sander. [Read more]
Store: Laguna Tools
|
Sanding Belt 6" x 118" 220 Grit
$31.00
Fits KSM 3000 Edge Sander. [Read more]
Store: Laguna Tools
|
Sanding Belt 6" x 118" 100 Grit
$36.50
Fits KSM 3000 Edge Sander. [Read more]
Store: Laguna Tools
|
20" Sanding Disk 150 Grit
$27.00
20" Sanding Disk for Platinum Series 20" Disk Sander with Stand. [Read more]
Store: Laguna Tools
|
|
3M 6'' Stickit? Gold P80 Grade Sanding Discs- 75 Disc Roll
$52.95
? Durable and longer lasting disc product? Discs have pressure-sensitive adhesive for easy application and removal [Read more]
Store: AutoBarn.com
|
Sanding Belt 6" x 118" 120 Grit
$36.50
Fits KSM 3000 Edge Sander. [Read more]
Store: Laguna Tools
|
12" Sanding Disk 100 Grit
$7.00
Fits Platinum Series 12" Disk Sander. [Read more]
Store: Laguna Tools
|
Festool 493078 Rotex Sander 5-inch Polishing Felt Hard for the RO 125
$31.00
The Festool 493078 is a pack of 5 Hard Felt Polishing Pad for 5 Sanders. It is used for polishing new paints and plastics. Features: Hard felt for polishing new paints and plastics. What's In the Box: (5) Felt Hard Polishing Pad- 493078 [Read more]
Store: Tool King
Brand: Festool
|
|
Festool 493914 RO 150 FEQ Rotex Sander Stickfix Polishing Pad
$25.50
Festool Polishing pad D6 Inch. These Festool Polishing Pads are designed for use with the Festool RO150FEQ Sander. 6 Inch Tool-free FastFix Polishing pad. Features: FastFix Polish for quick and effective polishing What's In the Box: Festool 6" Polishing Pad for RO 150 FEQ- 493914 [Read more]
Store: Tool King
Brand: Festool
|
General International 15-232 M1 Sander / Grinder
$199.99
The General International 15-232 M1 is a Benchtop Sander / Grinder combo. This versatile tool features double sealed ball-bearing construction and a quick change belt tension lever making it durable and easy to use. The belt sander can be positioned both horizontally and vertically and can be locked at any angle in between. The perfect addition to any workshop. Features: Double sealed ball-bearing construction for extended life Adjustable aluminum tool-rest allows you to keep tools close at hand Flexible gooseneck style work light illuminates your work Quick change belt tension lever facilitates fast and easy belt changes Belt sander can be operated both horizontally and vertically and locked at any angle in between Perfect for knife honing and sharpening or general shop use 3, 450 RPM grinder speed to handle just about any metal grinding application and 4900 FPM belt speed for sanding both hard and soft woods One 60 grit sanding belt & grinding wheel included What's In The Box: General International 15-232 M1 Sander / Grinder One 60 Grit Sanding Belt One Grinding Wheel [Read more]
Store: Tool King
Brand: General International
|
9'' Sanding Block
$11.95
Same style as Cat. No. 89800, except uses standard 9'' x 11'' sandpaper cut in thirds.By Tool Aid. [Read more]
Store: AutoBarn.com
|
Norton Body File Sheets For Straight Line Air Sander- 5 Pk., 80 Grit, 5-Pk., Model# 15772
$3.99
2 3/4in. x 17 1/2in. clip-on file sheets for use with Item# 15772, 16in. Straight Line Air Sander. U.S.A. Grit: 80, Sheet Size (in. x in.): 2 3/4 x 17 1/2, Sheets (qty.): 5 80-grit file sheets U.S.A. [Read more]
Store: Northern Tool and Equipment
Brand: Norton
|
|
Norton Body File Sheets For Straight Line Air Sander, Item# 15772 - 40 Grit, 5-Pk.
$4.99
2 3/4in. x 17 1/2in. clip-on file sheets for use with Item# 15772, 16in. Straight Line Air Sander. U.S.A. Grit: 40, Sheet Size (in. x in.): 2 3/4 x 17 1/2, Sheets (qty.): 5 40-grit file sheets [Read more]
Store: Northern Tool and Equipment
Brand: Norton
|
Northern Industrial Air Belt Sander - 4 CFM, 90 PSI, 18, 000 RPM
$59.99
Lightweight, air-powered sander turns the 3/8in. x 13in. belt at a free speed of 4000 feet per minute. Belt drive adjusts 360 to sand areas other sanders cant like inside surfaces and tight corners. In fact, it sands inside an area only 7/8in. wide and 4 7/8in. deep. Safety trigger. 18, 000 RPM free speed. 11 1/2in. long. 1/4in. NPT inlet. 90 PSI. 3/8in. minimum hose size. Average air consumption 4 CFM. Includes allen wrench and extra sanding belt. Order replacement belts #112851. Air Consumption (CFM): 4, Speed (RPM): 18, 000, Pad Diameter (in.): 3/8 x 13, Spindle Size (in.): 5/16 x 24 UNF, Random Orbital: No, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No, Tool Length (in.): 11 1/2 [Read more]
Store: Northern Tool and Equipment
Brand: Northern Industrial Tools
|
- Makita Belt Sander - 7.8 Amp, 3in. x 24in. Belt Size, Model# 9924DB
$229.99
This belt sander has a low-profile, balanced design with a powerful 7.8 Amp motor delivering 1300 feet per minute. Extended base allows flush sanding, and the replaceable ceramic wear plate is easy to maintain. Ball-bearing construction for long tool life. Features a highly efficient dust collection system for a cleaner work environment. Amps: 7.8, Belt Size (in. x in.): 3 x 24, Belt Speed (ft./min.): 1, 300, Dust Bag Included: Yes Double insulated Extra-long power cord Easy lever control for changing belts Includes abrasive belt [Read more]
Store: Northern Tool and Equipment
Brand: Makita
|
- SKIL Reconditioned 1/4-Sheet Palm Sander, Model# 7292-01-RT
$19.00
The SKIL 1/4-Sheet Palm Sander is ideal for woodworkers and DIY homeowners tackling projects around the house. The 2 Amp motor delivers ample power, while the soft-grip handle and Micro-Filter dust canister make this tool both comfortable to use and easy to clean. This Palm Sander is factory reconditioned to perform like new. NorthernTool.com offers reconditioned tools and equipment that are equal to the standards and quality of new products, yet give you the same features at considerable savings. This model Palm Sander qualifies for a Service Protection Plan. 2 Amp motor 0-14, 000 OPM Dust-sealed switch Pressure control technology has a 4-level LED display Micro-filtration system Clear view dust canister used for easy removal of dust Built-in vacuum adapter fits standard 1 1/4in. vacuum [Read more]
Store: Northern Tool and Equipment
Brand: Northern Tool and Equipment
|
|
Garage Pro Air Orbital Sander
$24.99
Air Orbital Sander1/4"" air inlet3/8"" air hose8, 000 rpm free speed6cfm average air consumption [Read more]
Store: JC Whitney
Brand: Garage Pro
|
- DEWALT Belt Sander - 8 Amp, 3in. x 21in. Belt Size, Model# DW433
$179.00
Amps: 8, Variable Speed: Yes, OPM: 850 - 1, 450, Belt Size (in. x in.): 3 x 21, Tool Weight (lbs.): 12, Dust Bag Included: Yes All-metal housing increases durability during a drop Dust collection shut-off eliminates dust stream toward users when collector is not in use Two position front handle increases user comfort Top exit cord allows for easy use of overhead receptacles Rubber grips reduce vibration Dust Sealed Switch: No Includes: sanding belt [Read more]
Store: Northern Tool and Equipment
Brand: Dewalt
|
Chicago Pneumatic Heavy-Duty Angle Air Sander
$299.99
HEAVY-DUTY ANGLE AIR SANDER Angle Air Sander develops up to 5, 000 rpm free speed to remove heavy rust, sand, metal and shape contoured filler patches faster and easier than ever Light weight (only 6-1/2 lbs.) and contoured throttle control make for easy handlingHardened and ground spiral bevel gears minimize vibration and ensure extended service life. 7"" diameter pad. Specifications: Average air consumption: 13.25 cfm. Air inlet thread: 1/4"" NPTF. Minimum hose size: 3/8"". [Read more]
Store: JC Whitney
Brand: Chicago Pneumatic
|
Chicago Pneumatic 7"" Heavy-Duty Vertical Air Sander
$244.99
7"" HEAVY-DUTY VERTICAL SANDER This Vertical Sander has a powerful 1-HP motor to make roughing in body filler, smoothing welds, removing paint and rust a snap! Dual handles simplify operation and put you in complete control Safer to use thanks to the automatic-release throttle with positive stop actionMore comfortable to use, too-muffled handle exhaust vents air away from work surface. 7"" diameter pad. Weighs only 4-1/2 lbs. Specifications. Maximum free speed: 5, 000 rpm. Average air consumption: 11.25 cfm. Air inlet thread: 1/4"" NPTF. Minimum hose size: 3/8"". [Read more]
Store: JC Whitney
Brand: Chicago Pneumatic
|
|
Performance Tool Jitterbug Orbital Sander
$36.99
JITTERBUG ORBITAL SANDER Compact palm grip design allows you to reach inside corners and other hard to reach places 3-1/2"" x 7-3/4"" pad size Just what you need for auto bodywork! Sander features air consumption of 6 cfm, 8, 000 rpm, 90 PSI and a 1/4"" air inlet. [Read more]
Store: JC Whitney
Brand: Performance Tool
|
- Makita Random Orbit Sander - 3 Amp, 12, 000 RPM, 5in. Disc Size, Model# BO5030K
$69.99
Weighing in at only 2.6 lbs., this palm sander will let you go on and on with little fatigue. The random orbit action gives you fast and super-smooth sanding while the quick-changing hook-and-loop abrasive discs get you back to your task in a hurry. Ergonomic body design offers more comfortable handling. Pad control system maintains sanding pad at a controlled speed upon start up. Dust bag adjusts to 12 positions for more efficient operation. U.S.A. Speed (RPM): 12, 000, Amps: 3, Disc Diameter (in.): 5, OPM: 12, 000, Tool Weight (lbs.): 2.6, Case Included: Yes, Dust Bag Included: Yes 1/8in. orbit diameter Efficient through-the-pad dust collection system Conveniently located on/off switch for one-handed operation Includes 120 grit abrasive disc [Read more]
Store: Northern Tool and Equipment
Brand: Makita
|
- DEWALT Reconditioned Variable Speed Belt Sander - 3in. x 21in., Model# DW433KR
$149.99
The DeWalt Belt Sander aggressively sands flat surface for removal of paint, varnish and other coating, to smooth rough surfaces and to scribe countertops. This DeWalt factory-reconditioned tool is the same high-quality unit as a new DeWalt tool. The reconditioned tools go through an even tougher quality inspection than the new tools, including two full-quality inspections by DeWalt, plus an added quality inspection by Northern. DeWalt reconditioned tools come with a 1-year parts and labor warranty. Amps: 8, Variable Speed: Yes, Belt Size (in. x in.): 3 x 21, Belt Speed (ft./min.): 850 - 1, 400, Tool Weight (lbs.): 12, Case Included: Yes, Dust Bag Included: Yes All-metal housing for increased durability 3-wheel design delivers low center of gravity Variable speed dial Innovative, efficient dust collection system 2-position front handle for user comfort Top exit cord for easy use of overhead receptacles Rubber grip helps reduce vibration [Read more]
Store: Northern Tool and Equipment
Brand: Dewalt
|
Northern Industrial Self-Vacuuming Air Dual-Action Sander - 6in.
$39.00
The Northern Industrial self-vacuuming air dual-action sander is ideal for shape sanding, feather edging, leveling, paint removal and auto body work. For wood, metal, fiberglass and polyester filler Ideal for shape sanding, feather edging, leveling, paint removal and auto body work 10, 000 RPM free speed 4 CFM air consumption; 90 PSI max. 1/4in. air inlet 5mm orbital stroke [Read more]
Store: Northern Tool and Equipment
Brand: Northern Industrial Tools
|
|
Northern Industrial 3in. Air Angle Sander
$39.99
The Northern Industrial air angle sander has a 3in. pad. Air sander with 3in. pad 15, 000 RPM free speed 3.5mm dia. orbit 4 CFM air consumption 1/4in. NPT air inlet Includes lock pin tool, pad and hex wrench [Read more]
Store: Northern Tool and Equipment
Brand: Northern Industrial Tools
|
Northern Industrial 2in. Air Angle Sander
$39.99
The Northern Industrial air angle sander has a 2in. pad. It is ideal for small and hard-to-reach jobs. Air sander with 2in. pad 15, 000 RPM free speed 3mm dia. orbit 4 CFM air consumption 1/4in. NPT air inlet Includes lock pin tool, pad and hex wrench [Read more]
Store: Northern Tool and Equipment
Brand: Northern Industrial Tools
|
Psa Vinyl-Face 6'' Diameter Random Orbital Sanding Pad
$23.95
For PSA abrasive discs. ? Non-Vacuum style ? 5/16''-24 male thread ? 13, 000 RPM maximum operating speed ? Thickness: 3/8'' (10 mm) ? Density: Medium ? Dynabrade quality.By Dynabrade. [Read more]
Store: AutoBarn.com
|
- Chicago Pneumatic Random Orbital Sander - 10mm Orbit, Self-Vacuuming, Model# CP7215SV
$169.99
This Chicago Pneumatic random orbital sander is great for heavy material removal, such as body filler. Features self-vacuuming dust extraction. Speed (RPM): 12, 000, Random Orbital: Yes 10mm Orbit .21 HP motor Teardrop handle Low sound and vibration design [Read more]
Store: Northern Tool and Equipment
Brand: Chicago Pneumatic
|
|
|
|
|
| |
|
Keywords: lijadora, pulidora, tronzado, tronzar, discos de corte, mesa de tronzar, desbastado, discos de desbaste, vasos de amolar, lijado, discos de láminas fijas, cepillado, cepillos de copa, cepillos de disco, pulido, boina pulidora, disco de corte, abrasivos
|
