PORTABLE SANDERS AND POLISHERS : PURPOSE AND TYPES
Portable sanders and polishers are used for surface finishing of materials such as metal, wood, ceramics, and plastics. Both tools are Lightweight and fairly easy cooperate.
They can be powered electrically or pneumatically and can be light-duty or heavy duty.
Fig.1 - Portable sanders - Lijadoras portátiles Portable sanders are used to remove paint, rust, corrosion, and imperfections from the surface of workplaces to produce a smooth surface for finishing. Field and machine shop maintenance personnel use the disk-type portable sander (Figure 1). The disk-type portable sander has a high-speed motor that rotates an abrasive disk, wire wheel, or a grinding wheel to prepare a surface for finishing. For sanding, a disk of abrasive paper is mounted with a flexible backing pad on the motor spindle (Figure 2). The basic motor unit is similar to the motor unit used for angle grinding, but with sanding there is no need for a wheel guard. On some models the motor spindle can be locked by depressing a lock button to install or remove the sanding disks. A side handle on the motor housing is used to support the sander during operation. This handle can be removed and screwed into the opposite side of the motor housing for left-handed operation. Pneumatic sanders have an advantage over electric sanders because they are lighter in weight and easier to handle which usually produces a better finished product.
Fig.2 - Portable sanders configurations - Configuraciones de lijadoras portátiles
NOTE: Portable sanders are not intended for use as portable abrasive cutoff saws. The torque for cut off sawing will ruin the soft gearing in the sander motor unit.
Various abrasive disks are used in the operation of the portable electric sander. These disks consist of different abrasive grains that have been bonded or glued onto a cloth or paper disk.
The backing material that supports the abrasive disk is made of a tough vulcanized rubber or fiber that can withstand hard use and constant flexing. Normally, the abrasive grain used on the disk is aluminum oxide, and the bonding agent is glue or special resin. Abrasive disks come in open-coat or closed-coat types, depending on the work to be performed.
The closed-coat disk has the abrasive grains bonded close together, while the open-coat disk has the abrasive grains spaced further apart. Open-coat abrasive disks are used for sanding soft materials that could possibly load up a closed coat disk, for example, wood sanding, removing paint and rust, and plastic. Closed-coat abrasive disks are used for sanding metal, finishing ceramics, and for smoothing rougher sanded areas.
Most portable sanders come with an instruction manual and those accessories that the manufacturer recommends for its use. These accessories can include a sanding setup which includes a flexible rubber backing plate, several types of sanding disks, and the hardware to secure the disk to the motor assembly. Other accessories may include flexible grinding disks with wheel guards, wire wheels, and odd shaped grinding cups with the appropriate wheel guard. Only use accessories approved by the manufacturer to avoid injury or damage to equipment.
The portable polisher (Figure 3) is used to produce a super finish or shine to the workpiece surface. Polishing or buffing a surface is desirable at times to increase smoothness and make the surface easier to clean. By polishing a surface, a workpiece can also be made more wear resistant. Portable polishers are generally more powerful than portable sanders since they encounter a greater frictional resistance when operation, portable polishers operate at slower speeds than in portable sanders so as not to mar the finished surface.
Pneumatic portable polishers are lighter in weight than electric models and may make fewer buffing marks on the finish. In order to improve the surface quality of a workpiece through polishing, it is necessary to use a soft bonnet or cover over the sander backing pad. Lamb's wool polishing bonnets are recommended with a soft rubber cushion pad separating the bonnet and the backing pad. Polishing compound, which is a mild abrasive, is used to help polish the surface. A left- or right-handed side handle is attached to the motor housing to help control the polisher during operations.
OPERATIONS WITH THE PORTABLE SANDER AND POLISHER
Operating the portable sander is difficult due to the rotating force of the disk, so the quality of the work depends mostly on the experience of the machine operator. Hold the portable sander so that the abrasive disk forms an angle of approximately 15° to the workpiece surface (Figure 4). Apply just enough pressure against the sander to bend the sanding pad and abrasive disk so that about 2 inches of the disk contact the surface. Move the sander from side to side, overlapping each path with the next. If the sander cuts irregularly or is hard to control, the sander is most likely at an angle less than the required 15° to the workpiece. If the sander gouges or leaves rough edges, the angle formed by the sander is most likely too great. When the sander is operating, keep it moving back and forth across the workpiece or lift it free to avoid damaging the surface.
Fig. 4 - Correct and incorrect methods of using the electric sander - Métodos correctos e incorrectos de usar la lijadora portátil
The portable polisher looks like the portable sander but it is built with a slower speed and high torque needed for polishing. Polishing is performed by placing the spinning lamb's wool polishing bonnet lightly against the workpiece and moving the polisher lightly back and forth while maintaining a light pressure on the workpiece. Avoid pressing down too hard, or the surface could get damaged. Use separate polishing bonnets for different polishing abrasives, glazes, or waxes. Reapply polishing compound as needed to keep a smooth finish.
|
LIJADORAS Y PULIDORAS PORTÁTILES : PROPÓSITO Y TIPOS
Las lijadoras y las pulidoras portátiles se utilizan para el acabado superficial de materiales tales como metal, madera, cerámica, y plásticos. Ambas herramientas son livianas y bastante maniobrables.
Pueden ser accionadas eléctricamente o neumáticamente y pueden ser de poca potencia o para gran demanda.
Las lijadoras portátiles se utilizan para quitar pintura, óxido, corrosión, e imperfecciones de la superficie de lugares de trabajo para producir una superficie lisa como terminación. El personal de mantenimiento de máquinas de taller o campo utiliza la lijadora portátil tipo disco (figura 1). La lijadora portátil tipo disco tiene un motor de alta velocidad que hace girar un disco abrasivo, un disco de alambre, o una rueda de abrasión para preparar una superficie para su terminación. Para lijado, un disco de esmeril se coloca con un soporte flexible de forro en el eje del motor (figura 2). La unidad de motor básica es similar a la unidad de motor usada para amoladora angular, pero con la lija no hay necesidad de un protector del disco. En algunos modelos el eje del motor puede ser trabado presionando un botón de bloqueo para instalar o para quitar los discos de lija. Una empuñadura lateral en el compartimento del motor es utilizada para soportar la lijadora durante la operación. Esta empuñadura se puede quitar y atornillar en el lado opuesto del compartimento del motor para operación a lado izquierdo. Las lijadoras neumáticas tienen una ventaja sobre las lijadoras eléctricas porque son más livianas en peso y más fáciles de maniobrar lo que produce generalmente un mejor producto final.
NOTA: Las lijadoras portátiles no están destinadas para su uso como sierras abrasivas portátiles de corte. El esfuerzo de torsión para el corte arruinará el delicado engranaje en la unidad de motor de la lijadora.
Varios discos abrasivos se utilizan en la operación de una lijadora eléctrica portátil. Estos discos consisten en diversos granos abrasivos que se han adherido o pegado sobre un disco de paño o de papel.
El material de apoyo que soporta el disco abrasivo se hace de un caucho o de una fibra vulcanizada resistente que puedan soportar un uso exigente y una flexión constante. Normalmente, el grano abrasivo usado en el disco es óxido de aluminio, y el agente adhesivo es pegamento o resina especial. Los discos abrasivos vienen en tipos de estructura abierta o cerrada, dependiendo del trabajo que se realizará.
Fig. 3 - Portable polishers - Pulidoras portátiles
El disco de estructura cerrada tiene los granos abrasivos adheridos en forma cercana entre sí, mientras que el disco de estructura abierta tiene los granos abrasivos con espaciado mayor entre sí. Los discos abrasivos de estructura abierta se utilizan para desbastar materiales suaves que podrían saturar posiblemente un disco de estructura cerrada, por ejemplo, lijado de madera, remoción de pintura y óxido, y plástico. Los discos abrasivos de estructura cerrada se utilizan para lijar metal, cerámica de acabado, y para alisar áreas granuladas más ásperas.
La mayoría de las lijadoras portátiles vienen con un manual de instrucciones y esos accesorios que el fabricante recomiende para su uso. Estos accesorios pueden incluir un equipo de lijado que incluya una placa de apoyo de goma flexible, varios tipos de discos abrasivos, y el conjunto de dispositivos para asegurar el disco al montaje de motor. Otros accesorios pueden incluir discos de pulido flexibles con carcasa protectora de rueda, cepillos de alambre, y vasos de amolar con la carcasa protectora apropiada. Utilice solamente los accesorios aprobados por el fabricante para evitar lesión o daño al equipo.
La pulidora portátil (figura 3) se utiliza para producir un final o un brillo destacado a la superficie del objeto. El pulido o lustre de una superficie es deseable ocasionalmente para aumentar la suavidad y hacer la superficie más fácil de limpiar. Al pulir una superficie, un objeto se puede también hacer más resistente al desgaste. Las pulidoras portátiles son generalmente más poderosas que las lijadoras portátiles puesto que encuentran una mayor resistencia friccional durante la operación, las pulidoras portátiles funcionan a velocidades más reducidas que las lijadoras portátiles para no estropear la superficie acabada.
Las pulidoras portátiles neumáticas son más ligeras en peso que los modelos eléctricos y pueden hacer menos marcas de pulido en el acabado. Para mejorar la calidad superficial de un objeto con el pulido, es necesario utilizar una caperuza suave o una cubierta sobre el plato de lijar o pulir. Los platos de pulido en piel con lana de cordero se recomiendan con una almohadilla de goma suave que separe el plato y el cojín del forro. El compuesto de pulido, que es un abrasivo suave, se utiliza para ayudar al pulimento la superficie. Una empuñadura lateral de izquierda o derecha se fija al compartimento del motor para ayudar a controlar la pulidora durante las operaciones.
OPERACIONES CON LA LIJADORA Y LA PULIDORA PORTÁTILES
El funcionamiento de la lijadora portátil es difícil debido a la fuerza giratoria del disco, así que la calidad del trabajo depende sobre todo de la experiencia del maquinista. Sostenga la lijadora portátil de modo que el disco abrasivo forme un ángulo de aproximadamente 15° a la superficie del objeto de trabajo (figura 4). Aplique sólo la presión necesaria contra la lijadora para doblar la almohadilla para lijar y el disco abrasivo de modo que aproximadamente 2 pulgadas del disco entren en contacto con la superficie. Mueva la lijadora de lado a lado, sobrepasando cada trayectoria con la siguiente. Si la lijadora corta irregularmente o es difícil de controlar, lo más probable es que esté en un ángulo menor que 15° con respecto al objeto. Si la lijadora hace desgastes sin precisión o deja bordes ásperos, el ángulo formado por la lijadora es probablemente demasiado grande. Cuando la lijadora está funcionando, hágala moverse hacia adelante y hacia atrás a través del objeto de trabajo o levántela libremente para evitar dañar la superficie.
La pulidora portátil es parecida a la lijadora portátil pero se construye con una velocidad más reducida y un alto esfuerzo de torsión necesarios para pulir. El pulido es llevado a cabo colocando el plato de pulido con piel de lana de cordero, moviéndolo hacia adelante y hacia atrás mientras que se mantiene una presión ligera en el objeto de trabajo. Evite presionar demasiado, o la superficie podría terminar dañada. Use caperuzas de pulido separadas para diferentes abrasivos, esmaltes, o ceras de pulido. Vuelva a aplicar el compuesto de pulido según lo necesitado guardar un final parejo. |
|
|
|
Porter-Cable 342K 1/4-Sheet Palm Sander Kit
$44.55
The Porter-Cable 342K is a 1/4-Sheet Palm Sander Kit. The Porter Cable 342K 1/4-Sheet palm sander delivers the power and durability to meet the demands of the professional shop environment with its 2.4 Amp motor. The Porter-Cable sander is designed with an accessible top cap which you can remove to quickly clean out and service the sander. This newly designed unit feels more comfortable in your hand and the new rubber top grip makes the unit easier to hold. With the increased importance of controlling dust in your shop this sander comes with the POREX dust canister which exceeds the durability efficiency of cloth dust bags. The 342K sander also has dual dust ports that can accept 1 and 1-1/2-Inch vacuum hoses. Features: 1/4-sheet size easily gets into tight spots and corners Top cap design for easy servicing Operates at 14, 000 OPM Measures 4-1/2 x 6 x 13 inches; weighs 3-3/4 pounds What's In the Box: Porter-Cable 342K 1/4-Sheet Palm Sander Kit [Read more]
Store: Tool King
Brand: Porter Cable
|
JET 659006K 22-44 Oscillating Drum Sander
$2,099.99
The Jet 659006K 22-44 OSC Oscillating Drum Sander has an exclusive oscillating feature. With the push of a button the 22-44 OSC sander can be operated as a simple sander or as an oscillating sander. When operating as a linear sander, the sander drum rotates as the conveyor feeds the workpiece through. When in the oscillating mode, in addition to the linear sanding operation, the sanding drum head oscillates from left to right and lowers heat build-up on the sanding belt to reduce loading and burning. Features: Oscillating feature reduces heat build-up on sanding belt to reduce loading and burning Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute Patented conveyor belt "Trackers" dramatically reduce the need for manual belt adjustments Sealed and permanently lubricated drum ball bearings for longer life Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results What's In The Box: Jet 659006K 22-44 OSC Oscillating Drum Sander Closed Stand [Read more]
Store: Tool King
Brand: Jet
|
Flex 318671 600 Grit Sanding Fleece for Finger Belt Sander (3 Pack)
$19.99
The Flex 318655 is a pack of 3 Sanding Fleece for LBS1105VE Finger Belt Sander. The 9 mm continuous sanding fleece fits 9 mm sanding arm. [Read more]
Store: Tool King
Brand: Flex
|
Makita 9920 3-inch x 24-inch Variable Speed Belt Sander
$219.99
The Makita 9920 is a 3-inch x 24-inch Variable Speed Belt Sander. Rated the quietest sander in its class at only 84dB. The belt sander features a belt speed of 690-1440 feet-per-minute for fast efficient stock removal and the extended base is highly effective for flush sanding larger areas. The highly efficient dust collector keeps the work area dust-free and the low profile design provides better balance and superior finishing. Features: Auto-tracking belt system tracks belt without adjustment Unique design allows flush sanding to the corner of the wall with nose and side of sander Front grip design for comfortable operation Dust bag for a cleaner work environment Long 16.4-foot power cord for easy maneuverability 8.8 AMP motor for powerful performance Sands wood or metal and removes paint and rust Optional sanding shoe available for precise sanding depth control Double insulated What's In The Box: Makita 9920 3-inch x 24-inch Variable Speed Belt Sander Abrasive Belt 80-Grit Dust Bag [Read more]
Store: Tool King
Brand: Makita
|
|
Porter Cable 97455 5-Inch Random Orbit Sander Kit
$149.55
The Porter Cable 97455 5-Inch Random Orbit Sander is a powerful yet lightweight variable speed sander that is comfortable to use and easy to control. The variable-speed dial control of the 97455 Random Orbit Sander allows the user to easily control the 2, 500-6, 800 OPM speed range of the sander while a two-position side handle provides greater comfort and control, especially during extended usage. Features: Powerful 4.5 Amp AC motor Electronic variable-speed dial controls the speed range of 2, 500-6, 800 OPM Random orbit action provides swirl-free sanding and polishing Includes 5-inch proprietary counter balance for use with 5-inch sanding/polishing pads Accepts all 5/16 - 24 spindle thread sanding/polishing accessories Features two-position (left or right) removable side handle for greater comfort and control Compact lightweight design, only 7-pounds, provides added comfort and reduced fatigue 100% ball and roller bearing construction ensures smooth operation What's In the Box: Porter Cable 97455 5-Inch Random Orbit Sander 5-Inch, 5 hole Hook and Loop Sanding Pad Dust Collection Hood 10-Foot Dust Collection Hose 1-1/2 to 2-1/2-Inch Hose Adaptor Sanding Disc Side Handle Carrying Bag Tool Wrench [Read more]
Store: Tool King
Brand: Porter Cable
|
Jet 708448 EHVS-80CS Horizontal Vertical Edge Sander, 115/230V, 1 Phas
$1,099.99
Jet 708448 EHVS-80CS Horizontal Vertical Edge Sander, 115/230V, 1 Phase [Read more]
Store: Tool King
Brand: Jet
|
Flex 257375 LP 1503VR Sander Fleece Wheel
$114.99
The Flex 257375 is a Poli-Clean Fleece Wheel for LP 1503 VR Sander. The hard-structured fleece wheel is used for cleaning welds and intensive, pore-deep removal of rust and oxidation layers. The Flex 257375 also creates particularly decorative longitudinal finishes on stainless steel. Features: Ideal for cleaning welds, and removal of rust and oxidation layers Creates decorative, longitudinal finishes on stainless steel. Designed for use with the Flex LP 1503 VR Sander. What's In the Box: Flex 257375 LP 1503VR Sander Fleece Wheel [Read more]
Store: Tool King
Brand: Flex
|
Chicago Pnuematic CP7858 3/8-Inch Belt Sander
$149.99
The Chicago Pnuematic CP7858 3/8-Inch Belt Sander is great for sanding in confined or hard to reach areas. The 180-degree arm and belt pivot of the CP7858 Belt Sander allow for greater access to the most difficult to reach areas with finesse and control. The CP7858 is powered by a .35HP motor, which produces a high speed of 22, 000 RPM, making it fast and efficient. Features: Higher RPM (22, 000) than most pneumatic belt sanders, making it faster and more efficient than most on the market 180-degree arm and belt pivot allow greater access to the most difficult to reach areas with finesse and control Insulated comfort-shaped handle with non-slip rubber grip feels comfortable at any angle and provides better control Strong and light with power to handle the toughest jobs The CP7858 comes with a .35hp motor Quick and easy belt changes with a simple push What's In The Box: Chicago Pnuematic CP7858 3/8-Inch Belt Sander [Read more]
Store: Tool King
Brand: Chicago Pneumatic
|
|
Shop Fox W1751 25-inch Widebelt Sander
$6,026.67
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. Specifications: * Sanding Motor: 7-1/2 HP, 220V, Single-Phase, 32A, 1725 RPM, 60 Hz * Conveyor Motor: 1/4 HP, 220V, Single-Phase, 1.8A, 1725 RPM, 60 Hz * Overall Size: 65-5/8" high x 42" wide x 32" deep * Footprint: 39" wide x 29" deep * Air Control: Built-in air filter/regulator * Oscillation System: 75 PSI Pneumatic Belt Tracking and Tensioning System * Sanding Drum Material: Heavy-Duty Rubber * Sanding Drum Drive: Double V-Belt * Belt Speed: 2050 FPM * Belt Size: 26 x 48-Inches * Conveyor Feed Rate: 13 and 16 FPM * Infeed Drum Material: Heavy-duty rubber * Maximum Board Width: 25-Inches * Maximum Board Thickness: 5-3/4-Inches * Minimum Board Thickness: 1/8-Inch * Minimum Board Length: 12-Inches * Dust Ports (Two): 5-Inches * Power Control: Independent Motor Control System * Machine Control: Unified Main Control System * Sanding Load Indication: Digital Amp Draw Meter * Light Sanding Control: Micro-Adjustable Graphite/Felt Platen System * Safety Control: Emergency Off Push Panel What's In The Box: * Shop Fox W1751 25-inch Widebelt Sander [Read more]
Store: Tool King
Brand: Shop Fox
|
Skil 7492-01 5-inch Random Orbit Sander
$41.99
Features * Pressure Control Technology warns user when excessive pressure is applied * Random Orbit Action for faster stock removal * Pad brake creates a gouge-free finish * Micro-filtration captures and contains fine dust particles * Clear View Dust Canister removes guess work of when to empty canister * Built-in vacuum port maximizes dust collection Specifications * Amperage: 2.8 * No Load OPM: 12, 500 * Voltage: 120V ~ 50 -60 Hz TOOL INCLUDES * 7492 Random Orbit Sander * Clear View Dust Canister * 3 Sandpaper Sheets [Read more]
Store: Tool King
Brand: Skil
|
Shop Fox W1708 12-inch Disc Sander
$173.33
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. The Shop Fox W1708 is a 12-inch Disc Sander. This production style 12-inch Disc Sander is ideal for shaping and smoothing edges, squaring end-cuts and truing simple and compound miters. The precision ground cast iron table adjusts for bevel sanding up to 45 and the 1 HP totally enclosed fan cooled direct drive motor spins at 1, 700 RPM, which is ideal for wood sanding applications. The Shop Fox Sander uses 12-inch pressure sensitive adhesive sanding discs. Features: Precision-ground cast iron table Ball bearing construction Miter gauge included 6-Foot power cord Safety key operated switch 2-Inch dust port Motor size: 1 HP, 110V Motor speed: 1, 725 RPM Disc size: 12-Inch Table tilt: 0-45 Table size: 17-1/2W x 8-1/4D-Inch Footprint: 13W x 10D-Inch Overall height: 13-1/2-Inch Approximate shipping weight: 74 lbs. What's In The Box: Shop Fox W1708 12-inch Disc Sander [Read more]
Store: Tool King
Brand: Woodstock International
|
Shop Fox W1730 Oscillating Edge Sander
$1,686.67
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. This sander features a 6 x 89-inch belt that oscillates 3/4-inch vertically at fifty two times per minute! It also has a quick release belt tension lever, a 0 to 90 degree tilting graphite-coated platen, and a 2 HP motor. The W1730 has a 26-7/8 x 12-inch cast iron main table for edge sanding and a 10 x 11-1/2-inch cast iron auxiliary table for spindle sanding. Three spindle sanding drums, measuring 1-1/2, 2, and 3-inches in diameter are included for sanding smaller curved surfaces. Other features include a 180 degree adjustable miter gauge, two 4-inch dust ports, a powder-coated finish, and a removable fence. Features: * T-Slot table & miter gauge * Two 4-inch dust ports * Quick release belt tension lever * Graphite coated platen * Oscillating sanding belt * Shielded & permanently lubricated ball bearings * Precision ground cast iron tables Specifications: * Motor: 2 HP, 220V, Single-Phase, 1725 RPM, TEFC * Table Size: 26-7/8 x 12-Inches * Table Travel: 3-3/4-Inches Vertical, 5-Inches Horizontal * Aux. Table Size: 10 x 11-1/2-Inches * Aux. Table Travel: 10-Inches * Sanding Belt Size: 6 x 89-Inches * Sanding Belt Speed: 3150 FPM * Sanding Belt Oscillation Stroke: 3/4-Inch * Drive Drum Diameter: 7-Inches * Idler Roller dDiameter: 3-7/8-Inches * Platen with Graphite Pad: 6-3/4 x 30-1/4-Inches * Platen Tilt: 0 through 90 (5 scale) * 3 Spindle Drums: 1-1/2, 2, 3 x 4-1/2-Inches High What's In The Box: * Shop Fox W1730 Oscillating Edge Sander [Read more]
Store: Tool King
Brand: Shop Fox
|
|
Safety Speed Cut WBS4375203 43 x 75-Inch Wide Belt Sander
$13,769.99
The Safety Speed Cut WBS4375203 is a 43 x 75-Inch Wide Belt Sander. The Series 75 Wide Belt Sanders deliver serious results. With heavier construction than the 3760 wide belt, a fully adjustable platen, variable speed DC powered conveyor table, and large 7-Inch throat opening, the Series 75 Sanders are ready to go to work in your busy shop environment. The large 75 sanding belt has 25% more abrasive surface than competing 60 belt machines. Larger sanding belts accumulate less heat and debris requiring less maintenance and fewer belt replacements. Features: Max Working Width - 42-Inch/1070mm Max. Working Length - Unlimited Max Working Thickness - 7 1/4-Inch/184mm Conveyor Speed - 0-18 fpm CFM Requirement - 1000 CFM What's In the Box: Safety Speed Cut WBS4375203 43 x 75-Inch Wide Belt Sander Photo electric belt tracking, Pneumatic belt tensioning 2 1/2-Inch adjustable platen 6-Inch internal dust chute 4 Emergency stops [Read more]
Store: Tool King
Brand: Safety Speed Cut
|
Safety Speed Cut WBS4375303 43 x 75-inch Wide Belt Sander
$14,529.99
The Series 75 Wide Belt Sanders deliver serious results. With heavier construction than the 3760 wide belt, a fully adjustable platen, variable speed DC powered conveyor table, and large 7 throat opening, the Series 75 Sanders are ready to go to work in your busy shop environment. The large 75 sanding belt has 25% more abrasive surface than competing 60 belt machines. Larger sanding belts accumulate less heat and debris requiring less maintenance and fewer belt replacements. [Read more]
Store: Tool King
Brand: Safety Speed Cut
|
Makita BO5030K 5-Inch Random Orbit Sander Kit
$79.55
The Makita BO5030K is a 5-Inch Random Orbit Sander Kit. This kit includes a 5-Inch random orbit sander, dust bag, case and one abrasive disc. Acheive smooth and fast sanding with the BO5030K's 3.0 AMP motor (12, 000 OPM). The Makita Random Orbit Sander's large 1/8-Inch random orbit action allows for fast and super smooth sanding. Features: 3.0 AMP motor (12, 000 OPM) Large 1/8-Inch random orbit action for fast and super smooth sanding. Pad control system for controlled pad speed upon start-up. Efficient through-the-pad dust collection system for a cleaner environment. Dust sealed swith minimizes contamination. Rubberized grip for improved operator comfort and control. uses quick change 5-Inch (8 hole) hook-and-loop abrasive paper. Oversized sealed ball bearing construction for longer tool life. What's In the Box: Makita BO5030K 5-Inch Random Orbit Sander Carrying Case Dust Bag 1 Abrasive Sanding Disc [Read more]
Store: Tool King
Brand: Makita
|
Shop Fox W1676 6-inch x 10-inch Combination Sander
$446.67
The Shop Fox W1676 6-inch x 10-inch Combination Sander is a combination 6-inch x 48-inch belt and 10-inch disc sander bridges the large gap between the bench-top models and the more expensive industrial models. The Shop Fox W1676 6-inch x 10-inch has a 1HP motor that offers plenty of torque for all your sanding operations. The weight of the heavy cast iron construction and full cabinet stand keeps vibration in check while offering a very attractive package. The cabinet on the Shop Fox W1676 is 100 percent usable for storage to help take away shop clutter. Features: Heavy cast iron tables keep vibration down Complete ball bearing construction Enclosed stand for extra storage What's In The Box: Shop Fox W1676 6-inch x 10-inch Combination Sander [Read more]
Store: Tool King
Brand: Shop Fox
|
|
Porter-Cable 352VS Factory Reconditioned 3 x 21-inch Belt Sander
$134.55
The Porter-Cable 352VS Factory Reconditioned 3-Inch x 21-Inch Variable Speed Belt Sander is designed for flush sanding up to vertical surfaces and features a dust bag that swivels 360 so it won't get in the way. Features: 8 Amp motor, AC only Variable-speed dial 850-1, 300 SFPM Belt and gear drive for professional durability Dust bag swivels 360 Fingertip belt-tracking knob Quick-release belt-change lever Motor is located over platen for maximum performance and perfect balance What's In The Box: Porter-Cable 352VSR Factory Reconditioned 3 x 21-Inch Belt Sander 100-Grit Ceramic Aluminum Oxide Belt Dust Bag Assembly [Read more]
Store: Tool King
Brand: Porter Cable
|
Powermatic 1790837 WB-37 37-Inch Wide Belt Sander
$13,999.99
The Powermatic 37-Inch Wide Belt Sander delivers the utmost performance in measurement and sanding, creating a flawless finish every time. The Powermatic Sander has centralized controls which allow the user to access all the needed buttons on one simple panel for more convenience. The variable speed feed belt allows the user to accurately dial in the exact feed speed to best suit each project and work environment. The 1790837 Sander also features a special digital readout control. This element is especially helpful because it will show the exact thickness of the finished piece or will allow the user to preset exactly what thickness they would prefer the finished piece to be. The sander also includes a unique measuring device, the auto thicknesser, that will capture the piece of wood to give the user an exact measurement of the starting thickness. The Powermatic 37"-Inch Wide Belt Sander has an air-eye system which controls the oscillation for the 37 x 75-Inch sanding belt. This prevents the belt from running off the end of the drums and uses the sanding surface in a more uniform manner. This also ensures sanding lines will not be left on the work piece. The 37-Inch wide belt sander also has a powerful three motor system for maximum performance. The first motor system allows for maximum horsepower to feed the drive drums. A second, smaller motor, directly powers the VS feed belt and a third, smaller motor, powers the feed table up and down to the desired thickness automatically and with ease. For safety, the 37-Inch Wide Belt Sander has a disc brake, which slows the machine quickly and stops it instantly in the event of an emergency. Features: Centralized controls allow you to access all the needed buttons on one simple panel The auto thicknesser will capture the piece of wood to give the user the exact starting thickness The variable speed feed belt allows you to accurately dial in the exact feed speed to best suit your project Digital readout will show the ... [Read more]
Store: Tool King
Brand: Powermatic
|
Jet 708597K Combination 9-in Disc / 6-in x 48-in Belt Sander with Encl
$749.99
Jet 708597K Combination 9-in Disc / 6-in x 48-in Belt Sander with Enclosed Stand [Read more]
Store: Tool King
Brand: Jet
|
Flex LRP1503VRA Boa Polishing Pipe Sander Kit
$779.99
The Flex LRP1503VRA Boa is the perfect solution for sanding and polishing pipe constructions. The sanding arm of the LRP1503VRA wraps itself around the pipe like a snake when pressure is applied, tackling radii up to 270 degrees. Spring resistance between the deflection rollers means that the sanding arm and sanding belt are always uniformly pretensioned. The Flex Boa needs only be be rotated slightly to continue treatment and achieve the perfect finish. In tight places - e.g. handrails that are fixed close to walls - the additional handle can be rotated 180 degrees. Features: Used for sanding and polishing pipes and pipe fittings. Wraps itself around the pipe like a snake when pressure is applied, tackling radii up to 270 degrees. Works great in tight places. What's In the Box: Flex LRP1503VRA Boa Polishing Pipe Sander Kit [Read more]
Store: Tool King
Brand: Flex
|
|
Shop Fox W1756 43-inch Widebelt Sander with 3-Phase Motor
$16,666.67
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. This wide-belt sander was built for the woodworkers who need the complete control of a felt platen for feather sanding and hard-roller sanding. With all of the most important features that have been proven effective over the years, this machine will deliver great workpiece finishes quickly and consistently. Features: * Convenient control panel with separate switches for each motor * Amp meter load sensing system * Disc brake system for emergency stops * Double infeed and outfeed pressure rollers * Fast belt changes (takes less than 30 seconds!) * Pneumatic sanding belt oscillation control * Digital readout to within 0.005" * Variable feed speeds * (5) 4-inch dust ports * Made in an ISO 9001 Factory Specifications: * Sanding Belt Motor: 25 HP, Prewired 220V (can run 440V with additional components), 3-Phase, 64/32A * Conveyor Feed Motor: 2 HP, Prewired 220V (can run 440V with additional components), 6/3A * Table Elevation Motor: 1/4 HP, Prewired 220V (can run 440V with additional components), 3-Phase, 1.2/0.6A * Pressure Roller Type (Double): Rubber * Infeed Drum: Spiral Grooved Rubber * Outfeed Drum: Steel * Belt Roller Diameter (Each): 4-Inch * Platen: Micro Adjustable Graphic/Felt * Sanding Belt Size: 43 x 60-Inch * Maximum Board Dimensions (W x H): 43 x 6-Inches * Minimum Board Length: 14-Inches * Conveyor Speeds: Variable, 14 - 60 FPM * Surface Speed of Drums: 2, 200 FPM What's In The Box: * Shop Fox W1756 43-inch Widebelt Sander with 3-Phase Motor [Read more]
Store: Tool King
Brand: Shop Fox
|
Jet 649003K 22x44 Plus Bench Top Drum Sander
$1,469.99
Takes the hassle out of professional sanding operations with the Performax Bench Top Drum Sander. Featuring an exclusive SandSmart-controlled, infinitely variable feed rate from 0 to 10 feet per minute, this 22-by-44-inch sander gives the ultimate sanded finish with no machine overload. A self-cooling, precision-machined and balanced 5- by-22-inch drum made of extruded aluminum means less downtime and fast removal of stock. A 1-3/4 HP, continuous-duty motor operates at up to 1, 700 RPM and handles heavier loads for longer periods of time. And, a precision-flattened reinforced steel conveyor bed feeds stock smoothly into the sander, while a no-slip power feed conveyor belt ensures consistent delivery. This versatile drum sander also features zinc-plated steel tension rollers mounted next to the drum, adjustable drum height and downward pressure for reduced snipe, and a 1/16-inch per turn height adjustment for faster adjustments and less downtime. A large, easy-to-use cast iron height adjustment hand wheel allows both radical height changes and minute adjustments for extremely precise stock removal. Features: Exclusive SandSmart controlled infinitely variable feed rate from 0- to 10-feet per minute for the ultimate sanded finish Self-cooling, precision-machined and balanced 5- by 22-inch extruded aluminum drum for smooth sanding with less downtime Continuous-duty motor for heavy duty, extended jobs Precision-flattened reinforced steel conveyor bed for optimal feeds Drum height and downward pressure are adjustable for eliminating snipe What's in the box: Jet 649003K 22-44 Plus Bench Top Drum Sander [Read more]
Store: Tool King
Brand: Jet
|
Powermatic 1791264 DS-20-3 20-in Disc Sander, 3 HP, 3 Phase, 230-460V
$2,199.99
Powermatic 1791264 DS-20-3 20-in Disc Sander, 3 HP, 3 Phase, 230-460V [Read more]
Store: Tool King
Brand: Powermatic
|
DeWalt D26451K Factory Reconditioned 5-inch Random Orbit Sander
$49.55
The DeWalt D26451KR Factory Reconditioned D26451K Random Orbit Sander has a 3.0 amp motors that deliver 12, 000 orbits per minute. The D26451K random orbit sander features the Controlled Finishing System (CFS), exclusive to DEWALT. CFS mechanically controls pad speed and minimizes material gouging that can occur during start up. The random orbit sanders offer a 3/32 orbit diameter that provides an optimal pad swath for the progressive removal of material. To increase durability, they feature DeWalt built and designed motors, dust sealed switches to prevent contamination as well as 100 percent sealed ball bearing construction, which provide longer life for the tool. In addition to the rubber grip, these sanders are also equipped with a dual-plane counter-balanced fan that mechanically reduces vibration further and, in turn, decreases the likelihood of user fatigue. Features: 3.0 Amp motor operates at 12, 000 opm providing ideal sanding speed for smooth finish Textured anti-slip top and body grip provides ultimate comfort and control during use Controlled Finishing System maintains controllable pad speed and minimizes gouging during start up Dust-Sealed Switch protects against dust ingestion for longer switch life Sealed 100 percent ball-bearing construction provides longer life High capacity dust bag with built-in vacuum adapter provides maximum dust collection with or with out a vacuum Dual-plane counter-balanced fan reduces user fatigue Accepts 5-inch, 8-hole hook & loop paper allows sanding discs to be switched back and forth quickly and easily What's In The Box: DeWalt D26451R 5-Inch Random Orbit Sander Dust Bag with Vacuum Adapter Heavy-Duty Kit Box [Read more]
Store: Tool King
Brand: Dewalt
|
|
Makita 9227CX3 7-Inch Electronic Variable Speed Polisher & Sander Kit
$219.99
The Makita 9227CX3 is a 7-Inch Electronic Variable Speed Polisher/Sander. The Makita 9227CX3 polisher is fast and powerful for clear coat finishes and fantastic for ultraslow polishing. Its variable-speed dial (from 600 to 3, 000 RPM) gives maximum control for buffing applications. The electronic speed control maintains constant speed under load. The tool converts from polisher to sander in a snap. Its lock-on button ensures continuous use at one speed. The polisher comes complete with hook-and-loop pad and hex wrench. Features: Pre-set speed setting dial (from 600-3, 000 RPM) for maximum control Electronic speed control maintains constant speed under load Easily converts to a sander 3-prong plug to prevent static electricity accumulation Fast and powerful polishing for clearcoat finishes Lock-on button for continuous use at one speed Shown with optional wool bonnet In the Box: Makita 9227C 7-Inch Electronic Variable-Speed Polisher-Sander Hook-and-Loop Pad - 743052-5 Hex Wrench - 783204-6 Hoop Handle - 416256-9 Side Handle - 152490-4 Polishing Kit [Read more]
Store: Tool King
Brand: Makita
|
Festool 571760 RO 150 FEQ 6-Inch Dual Mode Sander
$495.00
The Festool 571760 RO 150 FEQ 6-Inch Rotex Dual Mode Sander is an extremely versatile sander, easily converting from coarse sanding, to fine sanding, to polishing. With the ability to change pads without the use of tools, the RO 150 FEQ Sander can switch tasks quickly, reducing down time between applications. Features: Electronic controls ensure constant speed under load, step-less variable speed, and overload and thermal protection for extended tool life Jetstream design delivers highly efficient dust removal, providing cleaner air, better finishes, and longer abrasive and pad life A removable extraction channel helps to streamline the tool for tasks such as polishing Operate in gear-driven, aggressive mode for rapid stock removal using a combination of eccentric and rotational motion (Rotex rotary motion), or switch to random orbital mode for fine sanding Enclosed gear unit prevents dust from entering the gear and bearing unit, extending the life of the tool Plug-it cord enables rapid interchangeability with most other Festool tools, reducing downtime between tool changeovers Tool-less pad change design allows you to quickly transition between pads, minimizing downtime Fast and easy abrasive removal with resilient pad hooks and hard-wearing fabric backing, providing longer abrasive and pad life Included edge protector allows you to sand right up to adjacent surfaces without concern for damage and prevents jolting when sanding close to walls or edges Included auxiliary handle provides additional control when performing aggressive sanding operations What's In The Box: Festool 571760 RO 150 FEQ 6-Inch Rotex Dual Mode Sander Abrasive Sample Pack Auxiliary Side Handle Edge Protector Plug-It Power Cord Removable Dust Channel StickFix 6-Inch (150 mm) Sanding Pad Systainer (SYS 3) [Read more]
Store: Tool King
Brand: Festool
|
Chicago Pneumatic CP7255 6-Inch Palm Sander
$149.99
The Chicago Pneumatic CP7255 6-Inch Random Orbit Palm Sander has a 5mm orbit for high quality finishing. With a powerful, low vibration 160 watt motor the CP7255 palm sander makes all your sanding applications easy. Features 3/16-Inch (5mm) orbit produces a high quality finish Powerful 160w (0.21hp) motor ensures consistent power Tear drop handle is comfortable to use and allows for better control Low sound and vibration for more consistent results A color coded ring on the sander makes it easy to tell the CP7255 apart from other CP sanders that have different orbit sizes What's In The Box: Chicago Pneumatic CP7255 6-Inch Random Orbit Palm Sander [Read more]
Store: Tool King
Brand: Chicago Pneumatic
|
Porter Cable 343K 5-Inch Random Orbit Sander Kit
$59.00
The Porter Cable 343K 5-Inch Random Orbit Sander delivers the power and durability to meet the demands of the professional shop environment with it's 3.0 Amp motor. The random orbit sander is best for getting that fine, swirl-free finish you are looking for. This Porter-Cable sander uses 5-Inch hook & loop sanding paper. The Random Orbit Sander is designed with an accessible top cap which you can remove to quickly clean out and service the sander. This newly designed unit feels more comfortable in your hand and the new rubber top grip makes the unit easier to hold. With the increased importance of controlling dust in your shop this sander comes with the POREX dust canister which exceeds the durability efficiency of cloth dust bags. The Porter-Cable Sander also has dual dust ports that can accept 1- and 1-1/2-Inch vacuum hoses. Features: Top cap design allows users to service & clean out the unit without complete disassembly Dual dust ports accept 1" and 1-1/2" vacuum hoses to maximize dust pick up Improved ergonomics allow for comfortable body & top gripping 3.0 Amp motor, 12, 000 OPM for power and durability in the shop 8 hole hook & loop pad accepts standard paper Dust canister exceeds durability of cloth dust bags Rubber grip dampens vibration What's In The Box: Porter Cable 343K 5-Inch Random Orbit Sander Kit Heavy-Duty Kit Box [Read more]
Store: Tool King
Brand: Porter Cable
|
|
Safety Speed Cut WBATABLE Power Table Lift for 4375 Wide Belt Sander
$999.99
Safety Speed Cut WBATABLE Power Table Lift for 4375 Wide Belt Sander [Read more]
Store: Tool King
Brand: Safety Speed Cut
|
Porter-Cable 7345 5-Inch Random Orbit Sander
$139.99
The Porter-Cable 7345 5-Inch Random Orbit Sander is a lightweight yet powerful 5-Inch sander. Weighing in at just over 5-Pounds and using a 4.5 Amp motor this sander is sure to get the job done. Features: Electronic variable-speed dial adjusts from 2, 500-6, 800 OPM Random orbit, swirl-free sanding action for smooth results Includes 5-Inch proprietary counter balance for use with 5-Inch sanding/polishing pads Accepts accessories using 5/16-24 spindle thread Features two-position (left or right) removable side handle for greater comfort and control Compact lightweight design - 5-1/2 pounds 100% ball and roller bearing construction What's In The Box: Porter-Cable 7345 5-Inch Random Orbit Sander 5-inch PSA Pad Sanding Disc Two Position Side Handle Wrench [Read more]
Store: Tool King
Brand: Porter Cable
|
Chicago Pneumatic CP7202D Mini Pneumatic Disc Sander Kit
$109.99
The Chicago Pneumatic CP7202D Mini Disc Sander Kit is great for rust removal, surface preping and general auto body applications. The compact and lightweight design of the CP7202D Polisher makes it easy to maneuver in confined spaces and also offers better control with less user fatigue. Features: Compact and lightweight dessign allows for easy access in tight areas Rubber molded palm grip for added comfort and control Adjustable power regulator ensures precision results Two finger throttle for increased control and less fatigue Handle exhaust port reduces noise and directs air away from work area What's In The Box: Chicago Pneumatic CP7202D Mini Pneumatic Disc Sander Kit One 3-Inch Backing Pad Ten Each of 3-Inch 80, 100 and 120 Grit Sanding Discs One 3-Inch Fine, Medium and Coarse Surface Prep Discs Spindle Wrench Packed Heavy Duty Plastic Carrying Case [Read more]
Store: Tool King
Brand: Chicago Pneumatic
|
JET G-6DCK, 6"" x 48"" Belt / 12"" Disc Sander with Open Stand
$999.99
JET G-6DCK, 6" x 48" Belt / 12" Disc Sander with Open Stand [Read more]
Store: Tool King
Brand: Jet
|
|
Safety Speed Cut WBAHMETER Hour Meter for All Wide Belt Sanders
$199.99
The Safety Speed Cut WBAHMETER Hour Meter is an optional addition for the 4375 Model Wide Belt Sanders. This device has a dial display that allows you keep track of the usage of your belt sander. Since this feature is added to the machine during the construction of the sander it can only be ordered with the purchase of a new Safety Speed Cut Wide Belt Sander, it cannot be added to an existing machine. [Read more]
Store: Tool King
Brand: Safety Speed Cut
|
Porter-Cable 330 1/4 Sheet Finishing Sander
$76.55
The Porter-Cable 330 Speed-Bloc Quarter-Sheet Finishing Sander is small yet surprisingly powerful, housing a 1.2 Amp motor that produces 14, 000 OPM and a 5/64-Inch orbit. The 330 Finishing Sander will give you a smooth finish everytime. Features: Comfortable, easy-grip outer housing for hours of use without fatigue Solid metal frame for precision seating and alignment of bearings, motor and fan, providing the maximum in long, trouble-free tool life Rubber posts isolate the hand from vibration while enabling full sanding action and efficiency on the work 100% ball bearing construction 14, 000 OPM pad speed, with an aggressive 5/64-Inch orbit Accepts pre-cut adhesive or self cut standard paper with metal stamp What's In The Box: Porter-Cable 330 1/4 Sheet Finishing Sander Abrasive Sheet Clamp Tool [Read more]
Store: Tool King
Brand: Porter Cable
|
Porter-Cable 343K Factory Reconditioned 5-Inch Random Orbit Sander Kit
$39.55
The Porter Cable 343K Factory Reconditioned 5-Inch Random Orbit Sander delivers the power and durability to meet the demands of the professional shop environment with its 3.0 Amp motor. The random orbit sander is best for getting that fine, swirl-free finish you are looking for. Features: 3.0 Amp motor for power and durability Porous polyethylene dust canister provides better durability than cloth dust bags Improved ergonomics with rubber top grip for comfort during extended use Top cap design allows users to service or clean out the unit quickly and easily Dual dust ports accept 1-Inch and 1-1/2-Inch vacuum hoses 3/32-Inch orbit diameter for a fine, swirl-free finish Uses 5-Inch hook & loop discs What's In The Box: Porter-Cable 343KR Factory Reconditioned 5-Inch Random Orbit Sander Carrying Case [Read more]
Store: Tool King
Brand: Porter Cable
|
Delta 31-120 12-inch Disc Sander with Integral Dust Collection
$228.60
The Delta 31-120 12-Inch Disc Sander with Integral Dust Collection is perfect for smooth, efficient, free-hand sanding. The 31-120 lets you smooth and shape irregularly-shaped objects in a dust-free environment thanks to the integrated dust collection fan and hose. The hose on this Disc Sander can be attached to any standard shop vacuum for cleaner sanding operation resulting in less clean-up time and cleaner breathing air. The 31-120 Disc Sander has a cast-iron table that tilts with positive stops at 45 and 90 degrees for repeatable sanding tasks and a 1/2-horsepower motor to get it all done quickly and easily. Features: Induction-type motor for long-lasting, smooth performance Manual brake stops sanding disc in seconds Heavy-duty, steel disc plate features a 12inch diameter, 80-grit abrasive disc for fast, efficient sanding Tilting cast-iron table with 90- and 45-degree positive stops locks in position with spring-loaded, table-locking handles Cast-iron base with pre-drilled base holes for easy bench mounting Dust hose has connector with 2-1/4-inch outside diameter to attach quickly to any standard shop vacuum Integral dust collection fan draws dust away from table and into hose for cleaner sanding operation 3/8-inch x 3/4inch miter gauge slot machined into the table for projects that require sanding an angle or straight edge What's In The Box: Delta 31-120 12-Inch Disc Sander Dust Collection Hose 12-Inch 80-Grit Abrasive Disc Wrenches [Read more]
Store: Tool King
Brand: Delta
|
|
Festool 492127 RO 125 FEQ Rotex Sander Stickfix Sanding Pad Hard
$29.50
The Festool FastFix Hook & Loop Hard Sanding Pad works with the Festool RO 125 FEQ Dual-Mode Sander. It will give you coarse sanding results with minimal time and effort. Features: The FastFix system is a simple, quick and safe way to change sanding pads without the need for any other tools High edge strength, for flat surfaces and narrow edges 9 hole/hard What's In The Box: Festool 5-Inch Fast Fix Sanding Pad Hard - 492127 [Read more]
Store: Tool King
Brand: Festool
|
Flex 258888 30 mm Finger Belt Sander Large Roll Sanding Arm
$94.99
The Flex 258888 is a 30 mm Large Roll Sanding Arm for LBS 1105 VE Finger Belt Sander. The arm pivots 100 for hard to reach areas, angles and tight spaces. The Flex 258888 is mostly used for pipes and curves. The application cases are sanding weld seams on pipes, sanding down radii & transitions and deburring. Features: Designed for use with the LBS 1105 VE Finger Belt Sander Pivots 100 degrees to reach tight spaces and angles. What's In the Box: Flex 258888 30 mm Finger Belt Sander Large Roll Sanding Arm [Read more]
Store: Tool King
Brand: Flex
|
Makita 9031 1-1/8 x 21-Inch Variable Speed Belt Sander
$215.55
The Makita 9031 is a 1-1/8 x 21 inch Variable Speed Belt Sander. The variable speed belt sander is compact and lightweight (4.6 lbs) for use in close quarters. The belt speed can be adjusted between 656 and 3280 ft-min for use with a wide variety of materials and the narrow belt and exposed front pulley make working in confined spaces or on irregular shapes an experience in maneuverability. The ball and needle bearing construction ensure smooth operation and long tool life. The multi-position side handle of the Makita 9031 makes for easy and comfortable operation and the lock-on button makes extended use a breeze. Features: Compact and lightweight (4.6 lbs.) for close quarter work with excellent maneuverability Ball and needle bearing construction for smooth operation and long tool life Narrow belt and exposed front pulley for use in close quarters or on irregular shapes Multi-position side handle for easy and more comfortable operation Lock-on button for continuous operation What's In the Box: Makita 9031 1-1/8 x 21-Inch Variable Speed Belt Sander [Read more]
Store: Tool King
Brand: Makita
|
Festool 571726 ETS 150/3 EQ 6-inch Random Orbit Sander
$285.00
The Festool 571726 ETS 150/3 EQ 6-Inch Random Orbit Sander is ideal fine sanding and extra-fine sanding, producing an excellent surface finish with a short 1/8-inch (3.0 mm) stroke. The ergonomic design of the ETS 150/5 6-Inch Random Orbit sander is well-balanced and can be used either one or two-handed. Features: Ergonomic shaped handles are formed to fit your hand for either one or two-hand operation and features a rubberized top grip Electronic controls ensure constant speed under load, step-less variable speed, and overload and thermal protection for extended tool life Jetstream design delivers highly efficient dust removal, providing cleaner air, better finishes, and longer abrasive and pad life Plug-it cord enables rapid interchangeability with most other Festool tools, reducing downtime between tool changeovers Switch lock allows the power switch to be locked "on", providing optimum control Balanced vibration-stop design ensures better finish results, smooth operation and improved comfort StickFix tool-less pad change design allows you to quickly transition between pads, minimizing downtime Integrated pad brake tops the pad quickly, preventing damage to freshly finished workpieces when setting your tool down What's In The Box: Festool 571726 ETS 150/3 EQ 6-Inch Random Orbit Sander Abrasive Sample Pack Filter Bag with Holder Plug-It Power Cord StickFix Sanding Pad - Soft Systainer (SYS 3) [Read more]
Store: Tool King
Brand: Festool
|
|
Shop Fox W1688 Edge Sander
$766.67
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. You will appreciate the balance this Edge Sander strikes between industrial-like quality and a compact size that won't hog precious shop space. Solid features like the graphite coated cast iron platen, the precision ground cast iron tables, and the super stable powder coated stand will make this edge sander a lifetime investment. Equally important, the quick release belt tension lever makes changing belts a breeze and all controls are thoughtfully placed for convenient access. Features: * Shielded & lubricated ball bearings * Quick belt release * Spring loaded table height adjustment * Powder coated stand * 4-inch Dust port * Belt tracking and tension adjustment * Precision-ground cast iron table Specifications: * Motor Size: 1-1/2 HP, Single-Phase, 110/220V, Prewired 220V, 1, 725 RPM * Table Size: 22 x 10-1/2-Inches * Table Height: 36-3/4 x 41-3/4-Inches * Table Travel: 5-Inches * Belt Size: 6 x 80-Inches * Belt Speed: 1, 800 FPM * Footprint (W x D): 48 x 22-Inches * Platen Size: 6-3/4 x 29-3/4-Inches, Graphite Coated * Drum Diameter: 35/16-Inches What's In The Box: * Shop Fox W1688 Edge Sander [Read more]
Store: Tool King
Brand: Shop Fox
|
Flex 256525 Finger Belt Sander 9 mm Pointed Sanding Arm
$64.99
The Flex 256525 is a 9 mm Pointed Sanding Arm for LBS 1105 VE Finger Belt Sander. The arm pivots 100 for hard to reach areas and extremely tight spaces. The application cases are sanding wedge seams (small radius), sanding down corrosion spots, smoothen tight contours, deburring edges, sanding banisters and sanding groove gaps for tongue-and-groove boards. Features: Designed for use with the Flex LBS 1105 VE Finger Belt Sander. Used for sanding down corrosion spots, smoothen tight contours, deburring edges, sanding banisters and sanding groove gaps for tongue-and-groove boards. What's In the Box: Flex 256525 Finger Belt Sander 9 mm Pointed Sanding Arm [Read more]
Store: Tool King
Brand: Flex
|
Festool 492280 ETS 125 EQ Random Orbital Sander Stickfix Sanding Pad S
$29.50
Festool 5-Inch Soft Sanding Pad for ES 125 EQ 5-Inch Random Orbit Sander. Features: Good for fine finish work, sanding and fast stock removal Four holes on the inside for screws What's In The Box: One 5 Inch soft sanding pad - 492280 [Read more]
Store: Tool King
Brand: Festool
|
Porter-Cable 79120-5 120-Grit Hook & Loop Kit for 7800 Sander 5-Pack
$24.00
The Porter-Cable 79120-5 is a 120-Grit Hook & Loop Kit for 7800 Sander 5-Pack. The Porter Cable Hook & Loop Kit Converts the Porter Cable 7800 Drywall Sander for use with hook & loop discs. Features: 120 Grit Allows quicker, easier disc changing Converts Porter-Cable 7800 drywall sander for use with hook and loop discs What's In the Box: Porter-Cable 79120-5 120-Grit Hook & Loop Kit for 7800 Sander 5-Pack [Read more]
Store: Tool King
Brand: Porter Cable
|
|
Bosch 1250DEVS 6-Inch Dual-Mode Electronic Random Orbit Sander / Polis
$259.60
The Bosch 1250DEVS is a 6-Inch Dual-Mode Variable-Speed Random Orbit Sander/Polisher. The sander with Turbo Action has a 6.5 Amp motor. The dual mode selector allows to quickly switch between aggressive rough sanding and fine swirl-free sanding applications. The variable speeds between 3100-6650 OPM mean quick and controlled stock removal. Constant response circuitry provides soft start and extended gear life. A Micro-cellular backing pad conforms to surfaces for fine finishes. It includes a micro-cellular backing pad, a dust tube, an auxiliary handle, sanding disc and pad wrench. Two other types of backing pads are available separately. Features: Multipurpose sander wit two sanding modes. Random orbit mode for normal stock removal or fine finishing and Turbo driven eccentric orbit mode for aggressive stock removal at 5X random orbit sander removal rate Mode selector switch - Quickly change between random orbit mode and Turbo mode Powerful 6.5 Amps with variable-speed dial (3, 100-6, 650 OPM) - To match speed to workpiece and task Soft-Start - Reduces start-up torque Constant Response Circuitry - Maintains pad speed under heavy loads and protects against overloads High-performance Microcellular Backing Pad - Conforms to contours, provides a fine finish Integral pad dampening System - Helps prevent swirl marks for consistent fine finish Rugged Die-cast Aluminum Gear Housing with exclusive dual-bearing pad mount - Long life design eliminates wobble and vibration Tapered Soft-Grip Top, plus ergonomic handles Passive dust collection system - Vacuum cleaner and hose required - accepts Bosch VAC001, VAC009 and VAC010 hoses or VAC002 hose adapter Uses 6-Hole 6-Inch hook and loop discs - Compatible with industry standard discs What's In The Box Bosch 1250DEVS 6-Inch Dual-Mode Electronic Random Orbit Sander / Polisher Dust Tube 2601328072 Soft Backing Pad RS6045 Ambidextrous Auxiliary Handle 2602025067 Pad Wrench, 5mm (stored on tool) 1907950006 Sanding Disc [Read more]
Store: Tool King
Brand: Bosch
|
Mechanics M568DB 6-inch Dual Action Sander
$33.99
The Mechanics M568DB 6-inch Dual Action Sander is useful for body work and paint preparation without leaving swirl marks. The Mechanics Dual Action Sander combines the speed and aggressiveness of a belt sander with the ability to produce a finer finish than a standard orbital sander. Features: Dual action or random orbit sander moves the sanding disk in an ellipse so no single part of the abrasive material travels the same path twice, producing a fine finish without swirl marks 6-inch sanding disk Hand-held What's In The Box: Mechanics M568DB 6-inch Dual Action Sander [Read more]
Store: Tool King
Brand: Mechanics Tools
|
Flex 318647 Finger Belt Sander 240 Grit Sanding Fleece 3-Pack
$21.99
The Flex 318647 is a pack of 3 Sanding Fleece for LBS1105VE Finger Belt Sander. The 30 mm continuous sanding fleece fits 30 mm sanding arm. Features: 240 Grit for sanding a variety of materials Designed for use with the Flex LBS1105VE Finger Belt Sander. What's In the Box: Flex 318647 Finger Belt Sander 240 Grit Sanding Fleece 3-Pack [Read more]
Store: Tool King
Brand: Flex
|
Makita GV5010 5-inch Vertical Disc Sander
$109.99
The Makita GV5010 5-inch Vertical Disc Sander has a powerful, 4.2 Amp motor that delivers 4, 500 RPM. The rubberized grip maximizes user comfort while the compact size makes the Makita GV5010 easy to use. Features: Comfortable rubberized grip for improved operator comfort and control Ball-and-needle bearing construction for long tool life Unique and well-defined exterior Double insulated What's In The Box: Makita GV5010 5-inch Vertical Disc Sander [Read more]
Store: Tool King
Brand: Makita
|
|
Jet 649004K 22-44 PLUS Drum Sander with Open Stand
$1,499.99
This sander is a leader in it's class. It can sand up to 44" wide with greater accuracy that any thing else in it's class. Features: * Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload * Patented conveyor belt TRACKERS dramatically reduce the need for manual belt adjustments * Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage * Sealed and permanently lubricated drum ball bearings for longer life * Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a flat sanding surface for better results * Adjustable drum height and downward pressure feature virtually eliminates snipe * Large cast-iron handwheel adjusts height at 1/16" per turn for precise sanding thickness control * Patented abrasive take-up fasteners make changing abrasives quick and easy * Infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute * On/off switch with overload protection is front-mounted for operator's convenience * One feed and one drive motor for superior sanding control * Continuous-duty, 1-3/4HP motor is designed for heavier use for longer periods of time * Jet's exclusive SandSmart infinitely variable-feed control produces the ultimate finish at a rate from 0 to 10 feet per minute and prevents machine overload Specifications: * Net Weight: 296-Pounds * Style: Open Stand * Maximum Board Width: 44-Inches (2 passes) * Minimum Board Length: 2-1/4-Inches * Maximum Board Thickness: 4-Inches * Minimum Board Thickness: 1/32-Inch * Drum Diameter: 5-Inches * Drum Length: 22-INches * Drum Speed: 1700 RPM * Conveyor Speed: 0 - 10 SFPM * Conveyor Motor: 43 Inch-Pounds Torque, Direct Drive, DC * Dust Port Outside Diameter: 4-Inches * Motor Power: 1-3/4 HP * Motor Voltage: 115 V * Prewired Voltage: 115 V * Motor Curren... [Read more]
Store: Tool King
Brand: Jet
|
Makita GV7000C 7-Inch Variable Speed Disc Sander
$184.55
The Makita GV7000C is a 7 inch disc sander with 7.9 Amp motor which delivers variable speed of 2500-4700 RPM. The Makita GV7000C weighs 7.7-Pounds and is lightweight for easy control. Features: Lightweight for Easy Control (4.4 lbs.) Variable Speed (2, 500 - 4, 700 RPM) for Desired Application Electric Speed Control Maintains Speed Under Load Soft Start Feature Gradually Brings Tool to Speed Motor-Over-Pad design for better balance and control What's In the Box: Makita GV7000C 7-Inch Variable Speed Disc Sander [Read more]
Store: Tool King
Brand: Makita
|
Safety Speed Cut WBASCALE Digital Readout for All Wide Belt Sander Mod
$529.99
The Safety Speed Cut WBASCALE Digital Readout is an optional addition for any of the Safety Speed Cut Wide Belt Sanders. This device digitally displays the height positioning of the belt sander allowing for more accurate sanding. Since this feature is added to the machine during the construction of the sander it can only be ordered with the purchase of a new Safety Speed Cut Wide Belt Sander, it cannot be added to an existing machine. [Read more]
Store: Tool King
|
Flex 318663 Finger Belt Sander 240 Grit Sanding Fleece 3-Pack
$19.99
The Flex 318663 is a pack of 3 Sanding Fleece for the LBS1105VE Finger Belt Sander. The 9 mm continuous sanding fleece fits 9 mm sanding arm. Features: Designed for use with the Flex LBS 1105 VE Finger Belt Sander Used for sanding a variety of surfaces. What's In the Box: Flex 318663 Finger Belt Sander 240 Grit Sanding Fleece 3-Pack [Read more]
Store: Tool King
Brand: Flex
|
|
Shop Fox W1773 37-inch Drum Sander with 15-Horsepower 3-Phase Motor
$3,733.33
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. Designed for production shops, this 37-inch sander has what it takes to get those big jobs done - fast. Sand panels and boards up to 4-inches thick and 36-1/2-inches wide with the dual 6" sanding drums. Feed speed is adjustable from 6 to 18 FPM. The variable speed knob and amp meter make it easy to monitor workpiece load. Other great features: a hinged hood, an emergency stop bar, pedestal-mounted controls, four 4-inch dust ports, and a 15 HP, 220V/440V 3-phase motor. Features: * Industrial rubber conveyor belt (similar to wide belt sander belts) * Dual drums * State-of-the-art computer balanced drums * Hinged hood * Control panel with Amp load meter * Variable speed conveyor control box Specifications: * Sanding Drum Motor: 15 HP, Prewired 220V (Can Operate at 440V with Additional Components), 3-Phase, TEFC, 1725 RPM * Conveyor Motor: 1/4 HP * Maximum Board Width: 36-1/2" * Maximum Board Thickness: 4" * Minimum Board Length: 9" * Minimum Board Thickness: 1/16" * Surface Speed of Drums: 2800 FPM * Conveyor Feed Rate: Variable, 6 - 18 FPM * Sanding Drums: 2, Steel/Rubber * Drum Diameter: 6-Inches * Dust Ports: 4, 4-Inches * Sandpaper Width: 6-Inches * Overall Size (H x W x D): 49 x 68 x 50-1/2-Inches * Approximate Shipping Weight: 1260-Pounds What's In The Box: * Shop Fox W1773 37-inch Drum Sander with 15-Horsepower 3-Phase Motor [Read more]
Store: Tool King
Brand: Shop Fox
|
Powermatic DS20 Disc Sander 1791264
$2,199.99
Powermatic DS20 Disc Sander 1791264 [Read more]
Store: Tool King
Brand: Powermatic
|
Shop Fox W1710 24-inch Widebelt Sander with Single-Phase Motor and Dig
$8,653.33
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. Specifications: * Sanding Motor: 10 HP, 220V, 50 Amp, Single-Phase * Sanding Motor Speed: 1, 725 RPM * Feed Motor: 1 HP, 220V, 7 Amp, Single-Phase * Feed Motor Speed: 1, 725 RPM * Elevation Motor: 1/3 HP, 220V, 3 Amp, Single-Phase * Elevation Motor speed: 1, 725 RPM * Drum Speed: 3, 550 FPM * Drum Diameter: 7-7/8-Inches * Feed Rates: 14-3/4-49 FPM * Maximum Sanding Width: 24-Inches * Maximum Sanding Thickness: 6-Inches * Minimum Stock Length: 10-Inches * Minimum Stock Thickness: 1/8-Inch * Required Air Pressure: 57 PSI @ 7 CFM * Belt Size: 25 x 60-Inches * Dust Port: Two 4-Inch Ports * Footprint (W x D): 39-1/4 x 19-1/4-Inches * Height with Dust Ports: 71-Inches What's In The Box: * Shop Fox W1710 24-inch Widebelt Sander with Single-Phase Motor and Digital Readout [Read more]
Store: Tool King
Brand: Shop Fox
|
Chicago Pneumatic CP869S 7-Inch Pneumatic Angle Sander
$239.99
The Chicago Pneumatic CP869S 7-Inch Heavy Duty Pneumatic Angle Sander is ideal for heavy rust removal, sanding of metal and shaping of contoured filler patches. The high speed motor of the CP869S helps to make projects move faster, removing more material in less time. Features: Contoured throttle control provides a more comfortable, grip for easy handling Hardened and ground spiral bevel gears for reduced vibration and longer tool life What's In The Box: Chicago Pneumatic CP869S 7-Inch Heavy Duty Pneumatic Angle Sander [Read more]
Store: Tool King
Brand: Chicago Pneumatic
|
|
Jet 628900 10 x 20-Inch Benchtop Drum Sander
$679.99
The Jet 628900 is a 10 x 20-Inch Benchtop Drum Sander. The Jet Performax Sander will sand boards measuring up to three inches thick and 20 inches wide, while the aluminum, self-cooling drum protects the sanding surface from heat damage. Whether you're a hobbyist or a craftsperson with a smaller-sized home shop, this Benchtop Drum Sander is ready to tackle all your woodworking projects. Features: 1 HP motor for fast stock removal 4-Inch dust port for easy collection Large hand wheel for easy adjustment 20 inches wide capacity for sanding larger surfaces Quick paper change for less downtime and more productivity What's In the Box: Jet 628900 10 x 20-Inch Benchtop Drum Sander [Read more]
Store: Tool King
Brand: Jet
|
Porter-Cable 7800 Factory Reconditioned Long Reach Drywall Sander
$369.99
Porter-Cable 7800R Factory Reconditioned Long Reach Drywall Sander works in a speed range of 1400 rpm to 2000 rpm that is well suited for most sanding operations. The foam-backed abrasive sanding pads of the drywall sander hardly leave any swirl marks behind and ensure excellent results. The Porter-Cable Long Reach Sander is an efficient tool used to complete drywall sanding jobs in record time. The Porter-Cable 7800 Drywall Sander is a major time saver as it gets the task of drywall sanding done about 3 to 4 times quicker than traditional hand sanding methods. Most sanding jobs leave behind a trail of dust that makes cleaning up very cumbersome. However, this power tool has a static-dissipating 1-1/4-inch vacuum hose to collect even fine dust. The vacuum hose is 13 feet in length and you can cover a considerable area. Porter-Cable 7800 is lightweight weighing only 8 pounds to reduce fatigue during long hours of use. Features: 4.7 Amp motor for efficient sanding action Variable-speed 1400 to 2000 RPM to match the application Finish sands drywall joints three to four times faster than conventional methods Sands with minimal clean up when used with vacuum for dust collection What's In The Box: Porter-Cable 7800R Drywall Sander Sanding Pad 13-Foot Static-Dissipating 1-1/4-Inch Vacuum Hose Hook & Loop Straps for Mounting Power Cord to Vacuum Hose Operating Manual [Read more]
Store: Tool King
Brand: Porter Cable
|
Makita BO4556 Factory Reconditioned 1/4-Sheet Finishing Sander
$29.55
The Makita BO4556R Factory Reconitioned BO4556 1/4-Sheet Finishing Sander is an ideal solution for fine- tuning your woodworking projects. The through-the-pad dust collection system on this sander greatly reduces the harmful dust that can be detrimental to your health and tools. The precision bearing system greatly reduces vibration commonly associated with palm sanders for comfortable use, even over extended tasks. Features: 14, 000 OPM for fast and smooth finish sanding Precision engineered all-ball-bearing construction for reduced vibration and noise Contoured, rubberized palm grip design for improved operator comfort and control Large and easy to use paper clamps for fast and efficient paper installation Efficient through-the-pad dust collection system for a cleaner work environment Conveniently located on/off switch for easy one handed operation Rubber sealed switch prevents dust contamination for longer tool life What's In The Box: Makita BO4556R 1/4-Sheet Finishing Sander Dust Bag - 166078-4 Punch Plate - 450066-4 [Read more]
Store: Tool King
Brand: Makita
|
Porter Cable 362V Factory Reconditioned 4 x 24-Inch VS Belt Sander
$179.55
The Porter Cable 362VR is a Factory Reconditioned 4 x 24-Inch VS Belt Sander. The 362VR has a powerful 12.0 amp motor which provides professional power. The motor of the Porter-Cable 362VR is located over platen for maximum performance and perfect balance. The Porter-Cable Belt Sander was designed for flush sanding up to vertical surfacesVariable-speed dial is conveniently placed on the handle, allowing belt speed adjustment from 1, 000 to 1, 500 SFPM. The Belt Sander features a quick-release belt-change lever. The Fingertip belt-tracking knob allows for for quick, accurate belt adjustments. The 362VR Belt Sander has a large capacity dust collection bag which swivels 360. The Porter-Cable Belt Sander has a user-friendly design with ergonomically correct handles. Features: Powerful 12.0 amp motor which provides professional power Motor is located over platen for maximum performance and perfect balance Designed for flush sanding up to vertical surfaces Variable-speed dial is conveniently placed on the handle, allowing belt speed adjustment from 1, 000 to 1, 500 SFPM Quick-release belt-change lever Fingertip belt-tracking knob for quick, accurate belt adjustments Large capacity dust collection bag swivels 360User-friendly design with ergonomically correct handles Belt and gear drive system transfers power from the motor to the sanding belt What's In the Box: Porter Cable 362VR Factory Reconditioned 4 x 24-Inch VS Belt Sander [Read more]
Store: Tool King
Brand: Porter Cable
|
|
Chicago Pneumatic CP7215H Two-Handed Random Orbit Sander
$189.99
The Chicago Pneumatic 7215H Two-Handed Random Orbit Sander is a low profile random orbit sander. The CP 7215H measures 3-3/4-inch tall to fit into the tightest areas. The aggresive 3/8-inch orbit allows the Chicago Pneumatic 7215H to take off finishes at a mind blowing rate. Features: Ergonomic trigger Easy access speed control Chemical and impact resistant composite housing Long handle provides extra comfort and control, ideally suited when working on vertical surfaces Black ring for 3/8-inch orbit Premium CP low vibration pads 3/8-inch orbit for aggressive sanding Tear drop handle for comfort and support What's In The Box: Chicago Pneumatic CP7215H Two-Handed Random Orbit Sander [Read more]
Store: Tool King
Brand: Chicago Pneumatic
|
Chicago Pneumatic CP778 5-Inch High-Speed Pneumatic Sander
$89.99
The Chicago Pneumatic CP778 5-Inch Heavy Duty High-Speed Pneumatic Sander is perfect for small jobs including paint removal, shaping filler patches, weld smoothing, and rust removal. The compact and lightweight design of the CP778 Sander makes it easy to maneuver in confined spaces and also offers better control with less user fatigue. Features: Built-in regulator with variable speed throttle for precision speed control Durable, energy efficient 1/2 HP motor Lightweight design, produces low vibration for easy handling and comfort What's In The Box: Chicago Pneumatic CP778 5-Inch Heavy Duty High-Speed Pneumatic Sander [Read more]
Store: Tool King
Brand: Chicago Pneumatic
|
Powermatic 1791293 OES9138 Oscillating Edge Sander
$4,499.99
The Powermatic 1791293 OES9138 is an Oscillating Edge Sander. The Powermatic 1791296 has a 3 Horsepower, 3 Phase, 230/460V Motor. What's In the Box: Powermatic 1791293 OES9138 Oscillating Edge Sander [Read more]
Store: Tool King
Brand: Powermatic
|
Porter-Cable 371K Factory Reconditioned Compact Belt Sander
$69.55
The Porter-Cable 371K is a Factory Reconditioned 2-1/2 x 14-Inch Compact Belt Sander. The Porter-Cable Sander is ideal for broad, general workshop purposes, this belt sander smoothes and levels solid wood and veneered sheet goods, sands cabinet face frames, prepares edge-glued solid panels after clamping and does a fine job of removing lots of stock quickly. Features: Textured rubber body grip provides comfortable non-slip surface Flush side enables sanding up to perpendicular surface Metal components provide durability for professional applications Dust sealed, recessed switch offers accessibility while minimizing unintended turn-offs Removable auxiliary handle offers better control when two-handed use is desired Cord exit grip offers auxiliary gripping for various orientations Removable dust port for passive dust collection Low center of gravity feels balanced in various orientations What's In the Box: Porter-Cable 371K Factory Reconditioned Compact Belt Sander [Read more]
Store: Tool King
Brand: Porter Cable
|
|
Jet Performax 629004K 16-32 Plus Drum Sander with Stand
$999.99
The Jet Performax 629004K 16-32 Plus Drum Sander with Stand elevates the primary woodworking tasks of sanding from long and slow to short and fast, one may even venture to say fun. The unique design of the Jet 16-32 Plus Drum Sander provides ample capacity to handle small and large jobs with ease. Add to that the Jet exclusive SandSmart Technology that virtually eliminates workpiece or abrasive burn and you've got a great sander that will last for years to come. Features: Sandsmart control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage Top-position handwheel adjusts height at 1/16-inch per turn for precise sanding thickness control Infinitely variable-speed control produces the ultimate finish at a rate from 0 to 10 feet per minute Patented conveyor belt Trackers dramatically reduce the need for manual belt adjustments Continuous-duty, 1-1/2HP motor is designed for heavier use for longer periods of time On/off switch with overload protection is front-mounted for operator's convenience Adjustable drum height and downward pressure feature virtually eliminates snipe Patented abrasive take-up fasteners make changing abrasives quick and easy Sealed and permanently lubricated drum ball bearings for longer life One feed and one drive motor for superior sanding control What's In The Box: Jet Performax 629004K 16-32 Plus Drum Sander with Stand [Read more]
Store: Tool King
Brand: Jet
|
Shop Fox W1757 43-inch Double Head Widebelt Sander
$18,660.00
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. Double heads, triple benefits! Take advantage of three types of sanders in one. You have the feathering benefits of a platen type sander, the surfacing benefits of a drum type sander, and the surface removal and time saving benefits of a dual-grit double drum sander. Features: * Steel cabinet * Hard rubber infeed drum, adjustable platen on rear drums * Adjustable graphite/felt platen * Digital encoder depth control * Disc brake for emergency stop * Rubber pressure rollers * Amp/load meter * Variable speed * (5) 4" dust ports * Made in an ISO 9001 Factory Specifications: * Sanding Motor HP: 25 HP, TEFC, Prewired 220V (can run 440V with additional components), 3-phase, 64/32A * Conveyor Motor HP: 2 HP, TEFC, 6.5/3.3A * Table Lift Motor HP: 1/4 HP, TEFC, 1.2/0.6A * Footprint: 61 x 31-Inches * Maximum Board Width: 43-Inches * Maximum Board Thickness: 6-Inches * Minimum Board Length: 14-Inches * Minimum Board Thickness: 3/16-Inches * Front Drum Surface Speed: 3, 543 FPM * Rear Drum Surface Speed: 2, 565 FPM * Conveyor Speed: 14 - 60 FPM * Sanding Belt Size: 43 x 60-Inches * Overall Size (W x H x D): 66-1/4, 85-1/4, 63-Inches What's In The Box: * Shop Fox W1757 43-inch Double Head Widebelt Sander [Read more]
Store: Tool King
Brand: Shop Fox
|
Shop Fox W1772 37-inch Drum Sander with 10-Horsepower 1-Phase Motor
$3,733.33
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. Designed for production shops, this 37" sander has what it takes to get those big jobs done - fast. Sand panels and boards up to 4" thick and 36-1/2" wide with the dual 6" sanding drums. Feed speed is adjustable from 6 to 18 FPM. The variable speed knob and amp meter make it easy to monitor workpiece load. Other great features: a hinged hood, an emergency stop bar, pedestal-mounted controls, four 4" dust ports, and a 10 HP, 220V single-phase motor. Features: * Industrial rubber conveyor belt (similar to wide belt sander belts) * Dual drums * State-of-the-art computer balanced drums * Hinged hood * Control panel with Amp load meter * Variable speed conveyor control box Specifications: * Sanding Drum Motor: 10 HP, 220V, Single-Phase, TEFC, 1725 RPM * Conveyor Motor: 1/4 HP * Maximum Board Width: 36-1/2-Inch * Maximum Board Thickness: 4-Inch * Minimum Board Length: 9-Inch * Minimum Board Thickness: 1/16-Inch * Surface Speed of Drums: 2800 FPM * Conveyor Feed Rate: Variable, 6 - 18 FPM * Sanding Drums: 2, Steel/Rubber * Drum Diameter: 6-Inch * Dust Ports: 4, 4-Inch * Sandpaper Width: 6-Inch * Overall Size (H x W x D): 49 x 68 x 50-1/2-Inch What's In The Box: * Shop Fox W1772 37-inch Drum Sander with 10-Horsepower 1-Phase Motor [Read more]
Store: Tool King
Brand: Shop Fox
|
Shop Fox W1686 Oscillating Spindle Sander
$866.67
At this time, ToolKing.com is not authorized to sell Shop Fox products to customers in the following states - CA, CT, HI, LA, MA, MD, MS, RI and TN. If you reside in one of previous states and would like to purchase Shop Fox products, please visit http://www.woodstockint.com/ShopFoxMachinery and find an authorized dealer in your region. No expense has been spared to bring you this feature packed spindle sanding monster! With a whopping 27-1/2 x 27-1/2-inch precision-ground cast iron table, no other machine comes close to Shop Fox in size and capacity. The heavy-duty trunnion assembly will effortlessly support your heaviest oversized workpieces and the 1 HP motor will gracefully sculpture the hardest woods. Built for everyone from the demanding shop boss to the amateur who has it all, the Shop Fox W1686 will without a doubt meet the highest of expectations! Features: * Stand: Cabinet style, powder coated paint * Dust port: 4" opening * Steel table inserts * 100 grit sanding sleeve for each spindle Specifications: * Motor size: 1 HP, 110/220V, TEFC motor * Table: Precision-Ground Cast Iron, 27-1/2 x 27-1/2-Inch * Ten sSpindle Sizes: 1/4 x 5-Inch, 3/8 x 6-Inch, 1/2 x 6-Inch, 5/8 x 6-Inch, 3/4 x 9-Inch, 1 x 9-Inch, 1-1/2 x 9-Inch, 2 x 9-Inch, 3 x 9-Inch, 4 x 9-Inch, Tapered and Threaded * Table Height: 35-1/2-Inches * Table Tilt: 45 Front and 20 to the Back * Spindle Speed: 1, 725 RPM * Oscillation Speed: 72 SPM * Stroke Length: 1-1/2-Inch What's In The Box: * Shop Fox W1686 Oscillating Spindle Sander [Read more]
Store: Tool King
Brand: Shop Fox
|
|
Safety Speed Cut WBS4375101 43 x 75-Inch Wide Belt Sander
$13,769.99
The Safety Speed Cut WBS4375101 is a 43 x 75-Inch Wide Belt Sander. The Series 75 Wide Belt Sanders deliver serious results. With heavier construction than the 3760 wide belt, a fully adjustable platen, variable speed DC powered conveyor table, and large 7-Inch throat opening, the Series 75 Sanders are ready to go to work in your busy shop environment. The large 75 sanding belt has 25% more abrasive surface than competing 60 belt machines. Larger sanding belts accumulate less heat and debris requiring less maintenance and fewer belt replacements. Features: Max Working Width - 42-Inch/1070mm Max. Working Length - Unlimited Max Working Thickness - 7 1/4-Inch/184mm Conveyor Speed - 0-18 fpm CFM Requirement - 1000 CFM What's In the Box: Safety Speed Cut WBS4375101 43 x 75-Inch Wide Belt Sander [Read more]
Store: Tool King
Brand: Safety Speed Cut
|
Shop Fox W1712 6-inch x 12-inch Combination Sander
$566.67
The Shop Fox W1712 6-inch x 12-inch Combination Sander uses a 6-inch x 48-inch belt, a 12-inch disc, and a 1-1/2 HP motor to handle the toughest sanding jobs. Unlike many belt-driven sanders that require adjustments, the Shop Fox W1712 uses a direct ball bearing drive from the motor to the sanding disc and belt to deliver a maintenance and vibration free positive torque flow. For increased sanding versatility and control, both cast iron tables accept the miter gauge. The Shop Fox W1712 is production style 12-inch disc sander is ideal for shaping and smoothing edges, squaring end-cuts and truing simple and compound miters. Features: Closed, powder coated cabinet stand Shielded ball bearing construction Sanding belt speed: 878 FPM Disc speed: 1, 725 RPM Heavy-duty miter gauge What's in The Box: Shop Fox W1712 6-inch x 12-inch Combination Sander [Read more]
Store: Tool King
Brand: Shop Fox
|
Safety Speed Cut WBS3760101 37 x 60-Inch Wide Belt Sander
$9,679.99
The Safety Speed Cut WBS3760101 is a 37 x 60-Inch Wide Belt Sander. The 3760 is a serious wide belt sander for the small woodworking shop. This machine packs most of the features of our larger sanders into a lower cost machine. The 3760 is available with a 10 Hp single phase or 15 Hp three phase motor. This sander comes standard with a 3/4 Hp conveyor motor, photo electric belt tracking, pneumatic belt tensioning, 2 1/2-Inch removable platen, 6-Inch internal dust chute and 5 emergency stops. The sanding belt size is 37 x 60-Inch. Features: Max Working Width - 36-Inch/915mm Max. Working Length - Unlimited Max Working Thickness - 7 1/4-Inch/184mm Conveyor Speed - 0-18 fpm CFM Requirement - 1000 CFM What's In the Box: Safety Speed Cut WBS3760101 37 x 60-Inch Wide Belt Sander [Read more]
Store: Tool King
Brand: Safety Speed Cut
|
General International 15-005 M1 6 X 89-Inch Edge Belt Sander
$1,099.99
General International 15-005 M1 6 X 89-Inch Edge Belt Sander Features: * Heavy-duty enclosed stand for greater stability * Sanding belt operates at any angle from horizontal to vertical * Accurate belt tension and tracking adjustment * Cast-iron table can be adjusted up or down for full belt use * Safety switch with key - Unit cannot be started when key is removed from the switch * Cast-iron miter gauge can be locked in position for quick and easy setup * Adjustable cast-iron miter gauge * Adjustable, removable front table fence * Graphite backing reduces friction for longer belt life Specifications: * Belt Size: 6 x 89-Inches (152 x 2260 mm) * Belt Speed: 3900 Linear FPM (1279 Linear MPM) * Length of Work Area: 33-34-Inches (857 mm) * Dust Chute Outlet: 4-Inches (102 mm) * Front Table Size: 9-78 x 29-58-Inches (250 x 751 mm) * Auxiliary Table Size: 9-78 x 11-78-Inches (250 x 300 mm) * Base Dimensions (l x w): 21-12 x 17-Inches (546 x 432 mm) * Overall Dimensions (l x w x h): 50 x 21 x 49-Inches (1270 x 533 x 1245 mm) * Motor (Pre-Wired 220 V): 1-12 HP, 110/220 V, 18/9 A * Weight: 266-Pounds (121 kg) What's In The Box: * General International 15-005 M1 6 X 89-Inch Edge Belt Sander [Read more]
Store: Tool King
Brand: General International
|
|
Porter Cable 97466 6-inch Random Orbit Sander Kit
$149.55
The Porter Cable 97466 6-Inch Random Orbit Sander is a powerful yet lightweight variable speed sander that is comfortable to use and easy to control. The variable-speed dial control of the 97466 Random Orbit Sander allows the user to easily control the 2, 500-6, 800 OPM speed range of the sander while a two-position side handle provides greater comfort and control, especially during extended usage. Features: Powerful 4.5 Amp AC motor Electronic variable-speed dial controls the speed range of 2, 500-6, 800 OPM Random orbit action provides swirl-free sanding and polishing Includes 5-inch proprietary counter balance for use with 5-inch sanding/polishing pads Accepts all 5/16 - 24 spindle thread sanding/polishing accessories Features two-position (left or right) removable side handle for greater comfort and control Compact, lightweight design only 7 pounds provides added comfort and reduced fatigue 100 percent ball and roller bearing construction ensures smooth operation What's In the Box: Porter Cable 97466 6-Inch Random Orbit Sander 6-Inch, 5-Hole Hook and Loop Sanding Pad Dust Collection Hood 10-Foot Dust Collection Hose 1-1/2 to 2-1/2-Inch Hose Adaptor Sanding Disc Side Handle Tool Wrench Carrying Bag [Read more]
Store: Tool King
Brand: Porter Cable
|
Makita 9032 3/8 x 21-Inch Variable Speed Belt Sander
$229.55
The Makita 9032 is a 3/8 x 21-Inch Variable Speed Belt Sander. The belt sander from Makita features an adjustable sanding arm that pivots 100 for hard-to-reach places. The Makita 9032 has an electronic speed control dial (980 5600 ft-min) and a quick-release lever for easy belt replacement, as well as easily adjustable belt tracking with the turn of a knob. The Makita 9032's slim design and lightweight (only 3.3 lbs) make it easy to fill and sand in confined areas. Three different size arm assemblies and belts are available. The Makita Belt Sander connects to a dust collector for a cleaner workspace. Features: Electronic speed control dial (980 - 5, 600-Feet/min.) Adjustable sanding arm pivots 100-Degree for hard to reach areas Easily adjustable belt tracking with a turn of a knob Compact and lightweight (3.3 lbs.) 3 different size arm assemblies and belts available (1/4-Inch, 3/8-Inch, 1/2-Inch) for increased versatility What's In the Box: Makita 9032 3/8 x 21-Inch Variable Speed Belt Sander [Read more]
Store: Tool King
Brand: Makita
|
JET 649005K 22x44 Plus Drum Sander with Closed Stand
$1,599.99
JET 649005K 22x44 Plus Drum Sander with Closed Stand [Read more]
Store: Tool King
Brand: Jet
|
Porter-Cable 371K 2-1/2 x 14-inch Compact Belt Sander
$99.55
The Porter-Cable 371K is a 2-1/2 inches x 14 inches Compact Belt Sander Kit. This Belt Sander's cord exit grip offers auxiliary gripping for various orientations. The Porter-Cable 371K has a removable dust port for a cleaner workspace. The flush side enables sanding up to perpendicular surfaces. The Porter-Cable 371K has 5 Amps, 500 MWO motor which delivers power for hardwoods. Its rubber grip provides comfortable non-slip surface. Features: Dust Sealed, recessed switch offers accessibility while minimizing unintended turn-offs Removable auxiliary Handle offers better control when two-handed use is desired Low center of gravity feels balanced in various orientations Metal components provide durability for professional applications What's In the Box: Porter-Cable 371K 2-1/2 x 14-inch Compact Belt Sander 80-Grit Sanding Belt Carrying Case [Read more]
Store: Tool King
Brand: Porter Cable
|
|
|
|
|
| |
|
Keywords: lijadora, pulidora, tronzado, tronzar, discos de corte, mesa de tronzar, desbastado, discos de desbaste, vasos de amolar, lijado, discos de láminas fijas, cepillado, cepillos de copa, cepillos de disco, pulido, boina pulidora, disco de corte, abrasivos
|
