PORTABLE SANDERS AND POLISHERS : PURPOSE AND TYPES
Portable sanders and polishers are used for surface finishing of materials such as metal, wood, ceramics, and plastics. Both tools are Lightweight and fairly easy cooperate.
They can be powered electrically or pneumatically and can be light-duty or heavy duty.
Fig.1 - Portable sanders - Lijadoras portátiles Portable sanders are used to remove paint, rust, corrosion, and imperfections from the surface of workplaces to produce a smooth surface for finishing. Field and machine shop maintenance personnel use the disk-type portable sander (Figure 1). The disk-type portable sander has a high-speed motor that rotates an abrasive disk, wire wheel, or a grinding wheel to prepare a surface for finishing. For sanding, a disk of abrasive paper is mounted with a flexible backing pad on the motor spindle (Figure 2). The basic motor unit is similar to the motor unit used for angle grinding, but with sanding there is no need for a wheel guard. On some models the motor spindle can be locked by depressing a lock button to install or remove the sanding disks. A side handle on the motor housing is used to support the sander during operation. This handle can be removed and screwed into the opposite side of the motor housing for left-handed operation. Pneumatic sanders have an advantage over electric sanders because they are lighter in weight and easier to handle which usually produces a better finished product.
Fig.2 - Portable sanders configurations - Configuraciones de lijadoras portátiles
NOTE: Portable sanders are not intended for use as portable abrasive cutoff saws. The torque for cut off sawing will ruin the soft gearing in the sander motor unit.
Various abrasive disks are used in the operation of the portable electric sander. These disks consist of different abrasive grains that have been bonded or glued onto a cloth or paper disk.
The backing material that supports the abrasive disk is made of a tough vulcanized rubber or fiber that can withstand hard use and constant flexing. Normally, the abrasive grain used on the disk is aluminum oxide, and the bonding agent is glue or special resin. Abrasive disks come in open-coat or closed-coat types, depending on the work to be performed.
The closed-coat disk has the abrasive grains bonded close together, while the open-coat disk has the abrasive grains spaced further apart. Open-coat abrasive disks are used for sanding soft materials that could possibly load up a closed coat disk, for example, wood sanding, removing paint and rust, and plastic. Closed-coat abrasive disks are used for sanding metal, finishing ceramics, and for smoothing rougher sanded areas.
Most portable sanders come with an instruction manual and those accessories that the manufacturer recommends for its use. These accessories can include a sanding setup which includes a flexible rubber backing plate, several types of sanding disks, and the hardware to secure the disk to the motor assembly. Other accessories may include flexible grinding disks with wheel guards, wire wheels, and odd shaped grinding cups with the appropriate wheel guard. Only use accessories approved by the manufacturer to avoid injury or damage to equipment.
The portable polisher (Figure 3) is used to produce a super finish or shine to the workpiece surface. Polishing or buffing a surface is desirable at times to increase smoothness and make the surface easier to clean. By polishing a surface, a workpiece can also be made more wear resistant. Portable polishers are generally more powerful than portable sanders since they encounter a greater frictional resistance when operation, portable polishers operate at slower speeds than in portable sanders so as not to mar the finished surface.
Pneumatic portable polishers are lighter in weight than electric models and may make fewer buffing marks on the finish. In order to improve the surface quality of a workpiece through polishing, it is necessary to use a soft bonnet or cover over the sander backing pad. Lamb's wool polishing bonnets are recommended with a soft rubber cushion pad separating the bonnet and the backing pad. Polishing compound, which is a mild abrasive, is used to help polish the surface. A left- or right-handed side handle is attached to the motor housing to help control the polisher during operations.
OPERATIONS WITH THE PORTABLE SANDER AND POLISHER
Operating the portable sander is difficult due to the rotating force of the disk, so the quality of the work depends mostly on the experience of the machine operator. Hold the portable sander so that the abrasive disk forms an angle of approximately 15° to the workpiece surface (Figure 4). Apply just enough pressure against the sander to bend the sanding pad and abrasive disk so that about 2 inches of the disk contact the surface. Move the sander from side to side, overlapping each path with the next. If the sander cuts irregularly or is hard to control, the sander is most likely at an angle less than the required 15° to the workpiece. If the sander gouges or leaves rough edges, the angle formed by the sander is most likely too great. When the sander is operating, keep it moving back and forth across the workpiece or lift it free to avoid damaging the surface.
Fig. 4 - Correct and incorrect methods of using the electric sander - Métodos correctos e incorrectos de usar la lijadora portátil
The portable polisher looks like the portable sander but it is built with a slower speed and high torque needed for polishing. Polishing is performed by placing the spinning lamb's wool polishing bonnet lightly against the workpiece and moving the polisher lightly back and forth while maintaining a light pressure on the workpiece. Avoid pressing down too hard, or the surface could get damaged. Use separate polishing bonnets for different polishing abrasives, glazes, or waxes. Reapply polishing compound as needed to keep a smooth finish.
|
LIJADORAS Y PULIDORAS PORTÁTILES : PROPÓSITO Y TIPOS
Las lijadoras y las pulidoras portátiles se utilizan para el acabado superficial de materiales tales como metal, madera, cerámica, y plásticos. Ambas herramientas son livianas y bastante maniobrables.
Pueden ser accionadas eléctricamente o neumáticamente y pueden ser de poca potencia o para gran demanda.
Las lijadoras portátiles se utilizan para quitar pintura, óxido, corrosión, e imperfecciones de la superficie de lugares de trabajo para producir una superficie lisa como terminación. El personal de mantenimiento de máquinas de taller o campo utiliza la lijadora portátil tipo disco (figura 1). La lijadora portátil tipo disco tiene un motor de alta velocidad que hace girar un disco abrasivo, un disco de alambre, o una rueda de abrasión para preparar una superficie para su terminación. Para lijado, un disco de esmeril se coloca con un soporte flexible de forro en el eje del motor (figura 2). La unidad de motor básica es similar a la unidad de motor usada para amoladora angular, pero con la lija no hay necesidad de un protector del disco. En algunos modelos el eje del motor puede ser trabado presionando un botón de bloqueo para instalar o para quitar los discos de lija. Una empuñadura lateral en el compartimento del motor es utilizada para soportar la lijadora durante la operación. Esta empuñadura se puede quitar y atornillar en el lado opuesto del compartimento del motor para operación a lado izquierdo. Las lijadoras neumáticas tienen una ventaja sobre las lijadoras eléctricas porque son más livianas en peso y más fáciles de maniobrar lo que produce generalmente un mejor producto final.
NOTA: Las lijadoras portátiles no están destinadas para su uso como sierras abrasivas portátiles de corte. El esfuerzo de torsión para el corte arruinará el delicado engranaje en la unidad de motor de la lijadora.
Varios discos abrasivos se utilizan en la operación de una lijadora eléctrica portátil. Estos discos consisten en diversos granos abrasivos que se han adherido o pegado sobre un disco de paño o de papel.
El material de apoyo que soporta el disco abrasivo se hace de un caucho o de una fibra vulcanizada resistente que puedan soportar un uso exigente y una flexión constante. Normalmente, el grano abrasivo usado en el disco es óxido de aluminio, y el agente adhesivo es pegamento o resina especial. Los discos abrasivos vienen en tipos de estructura abierta o cerrada, dependiendo del trabajo que se realizará.
Fig. 3 - Portable polishers - Pulidoras portátiles
El disco de estructura cerrada tiene los granos abrasivos adheridos en forma cercana entre sí, mientras que el disco de estructura abierta tiene los granos abrasivos con espaciado mayor entre sí. Los discos abrasivos de estructura abierta se utilizan para desbastar materiales suaves que podrían saturar posiblemente un disco de estructura cerrada, por ejemplo, lijado de madera, remoción de pintura y óxido, y plástico. Los discos abrasivos de estructura cerrada se utilizan para lijar metal, cerámica de acabado, y para alisar áreas granuladas más ásperas.
La mayoría de las lijadoras portátiles vienen con un manual de instrucciones y esos accesorios que el fabricante recomiende para su uso. Estos accesorios pueden incluir un equipo de lijado que incluya una placa de apoyo de goma flexible, varios tipos de discos abrasivos, y el conjunto de dispositivos para asegurar el disco al montaje de motor. Otros accesorios pueden incluir discos de pulido flexibles con carcasa protectora de rueda, cepillos de alambre, y vasos de amolar con la carcasa protectora apropiada. Utilice solamente los accesorios aprobados por el fabricante para evitar lesión o daño al equipo.
La pulidora portátil (figura 3) se utiliza para producir un final o un brillo destacado a la superficie del objeto. El pulido o lustre de una superficie es deseable ocasionalmente para aumentar la suavidad y hacer la superficie más fácil de limpiar. Al pulir una superficie, un objeto se puede también hacer más resistente al desgaste. Las pulidoras portátiles son generalmente más poderosas que las lijadoras portátiles puesto que encuentran una mayor resistencia friccional durante la operación, las pulidoras portátiles funcionan a velocidades más reducidas que las lijadoras portátiles para no estropear la superficie acabada.
Las pulidoras portátiles neumáticas son más ligeras en peso que los modelos eléctricos y pueden hacer menos marcas de pulido en el acabado. Para mejorar la calidad superficial de un objeto con el pulido, es necesario utilizar una caperuza suave o una cubierta sobre el plato de lijar o pulir. Los platos de pulido en piel con lana de cordero se recomiendan con una almohadilla de goma suave que separe el plato y el cojín del forro. El compuesto de pulido, que es un abrasivo suave, se utiliza para ayudar al pulimento la superficie. Una empuñadura lateral de izquierda o derecha se fija al compartimento del motor para ayudar a controlar la pulidora durante las operaciones.
OPERACIONES CON LA LIJADORA Y LA PULIDORA PORTÁTILES
El funcionamiento de la lijadora portátil es difícil debido a la fuerza giratoria del disco, así que la calidad del trabajo depende sobre todo de la experiencia del maquinista. Sostenga la lijadora portátil de modo que el disco abrasivo forme un ángulo de aproximadamente 15° a la superficie del objeto de trabajo (figura 4). Aplique sólo la presión necesaria contra la lijadora para doblar la almohadilla para lijar y el disco abrasivo de modo que aproximadamente 2 pulgadas del disco entren en contacto con la superficie. Mueva la lijadora de lado a lado, sobrepasando cada trayectoria con la siguiente. Si la lijadora corta irregularmente o es difícil de controlar, lo más probable es que esté en un ángulo menor que 15° con respecto al objeto. Si la lijadora hace desgastes sin precisión o deja bordes ásperos, el ángulo formado por la lijadora es probablemente demasiado grande. Cuando la lijadora está funcionando, hágala moverse hacia adelante y hacia atrás a través del objeto de trabajo o levántela libremente para evitar dañar la superficie.
La pulidora portátil es parecida a la lijadora portátil pero se construye con una velocidad más reducida y un alto esfuerzo de torsión necesarios para pulir. El pulido es llevado a cabo colocando el plato de pulido con piel de lana de cordero, moviéndolo hacia adelante y hacia atrás mientras que se mantiene una presión ligera en el objeto de trabajo. Evite presionar demasiado, o la superficie podría terminar dañada. Use caperuzas de pulido separadas para diferentes abrasivos, esmaltes, o ceras de pulido. Vuelva a aplicar el compuesto de pulido según lo necesitado guardar un final parejo. |
|
|
|
Ingersoll Rand Mini Polisher Kit, Model# 3129K
Ingersoll Rand Mini Polisher kit is ideal for buffing and polishing paint, metal, and plastic surfaces to a high-gloss finish. Delivers the same performance of polishers twice it s size. Double-sided, adjustable speed settings provide variability for a broader range of applications. Air Consumption (CFM): 2.21, Speed (RPM): 1, 800, Pad Diameter (in.): 3, Variable Speed: Yes, Side Handle: No, Pads Included (qty.): 4, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Tool Length (in.): 6 Pistol grip with variable speed trigger for maximum control [Read more]
Brand: Ingersoll Rand
|
Ingersoll Rand Air Angle Polisher 7in. Dia. Pad, Model# 314
This Ingersoll Rand air angle polisher buffs and polishes a wide range of surfaces to a high-gloss, professional finish. Air Consumption (CFM): 8, CFM at Load: 22, Speed (RPM): 1, 500 - 2, 500, Pad Diameter (in.): 7, Spindle Size (in.): 5/8 x 11, Variable Speed: Yes, Side Handle: Yes, Pads Included (qty.): 1, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No Ball-bearing construction Built-in regulator [Read more]
Brand: Ingersoll Rand
|
Chicago Pneumatic Air Mini Polisher Kit 3in. Dia. Pad, 1/4 HP, Model# CP7201P
Chicago Pneumatic air mini disc polisher is compact and lightweight for easy access in tight areas. Kit includes 3in. dia. polishing pads. Designed for small area repair. Air Consumption (CFM): 18, Speed (RPM): 0 - 2, 500, Pad Diameter (in.): 3, Variable Speed: Yes, Side Handle: No, Pads Included (qty.): 4, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: Yes, Tool Weight (lbs.): 1.5, Tool Length (in.): 4 1/2 1/4 HP motor Handle exhaust; 2-finger throttle Adjustable power regulator Silenced exhaust directs air away from work area Includes: 1-3in. backing pad, 1-3 1/2in. wool polishing pad, 2-3 1/2in. foam compounding pads (1 yellow & 1 white) and spindle key [Read more]
Brand: Chicago Pneumatic
|
Ingersoll Rand Air Vertical Polisher 7in. Dia. Pad, 1 HP, Model# 318
This Ingersoll Rand air vertical polisher makes it easy to buff and polish all painted surfaces. It features a handle exhaust that directs air away from the work area. Air Consumption (CFM): 16, CFM at Load: 22, Speed (RPM): 2, 800, Pad Diameter (in.): 7, Variable Speed: Yes, Side Handle: Yes, Pads Included (qty.): 1, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No Compact, lightweight polisher/buffer Throttle helps eliminate paint burning 1 HP motor Handle exhaust Planetary gear reduction [Read more]
Brand: Ingersoll Rand
|
|
FREE SHIPPING Makita Polisher 10 Amp, 3000 RPM, 7in. Disc Size, Model# 9227CY
This variable speed polisher is fast and powerful for clear coat finishes and is ideal for ultra-slow polishing. Electronic speed control maintains constant speed under load. Converts from a polisher to a sander in seconds. Speed (RPM): 3, 000, Amps: 10, Variable Speed: Yes, Tool Length (in.): 18 1/2 Easily converts to sander 3-prong plug to prevent static electricity buildup Spindle thread 5/8in. - 11 UNC Fast and powerful polishing for clearcoat finishes Lock-on button for continuous use at one speed Wool bonnet not included [Read more]
Brand: Makita
|
FREE SHIPPING Makita Polisher 7.9 Amp, 1200 RPM, 7in. Disc Size, Model# PV7001C
This lightweight 7.9 Amp polisher has a high power-to-weight ratio for easy control and reduced operator fatigue. Has two speed selections. Variable speed trigger with electronic speed control lets you tailor the speed to the specific application. Speed (RPM): 600 - 1, 200, Amps: 7.9, Variable Speed: Yes, OPM: 600 - 1, 200 Electronic speed control maintains speed under load Soft start Lock-on button for continuous running Uses hook-and-loop accessories Externally accessible brushes Lightweight design Includes wrench, side handle, hook-and-loop pad, cover and air deflector [Read more]
Brand: Makita
|
FREE SHIPPING Makita 4in. Electronic Wet Stone Polisher, Model# PW5001C
This wet stone polisher is precision engineered for a professional finish every time it makes contact with granite, marble, limestone and more. With a 7.9 Amp motor, soft start and variable speed control, it can handle the most demanding polishing, sanding, shaping and light grinding jobs with ease. Amps: 7.9, Variable Speed: Yes, Disc Diameter (in.): 4, OPM: 2, 000 - 4, 000 For polishing granite, marble, limestone and more Electronic speed control Soft start feature for smooth startups 3 holes at spindle top evenly spread water to pad and prevent clogging Overload switch Ground fault circuit interrupter (GFCI) plug [Read more]
Brand: Makita
|
FREE SHIPPING Milwaukee Electric Polisher 11 Amp, 7in./9in. Pad, Model# 5455
Milwaukee Polishers are built for the professional, with a powerful motor to maintain the right speed. This versatile model will accept 7in. or 9in. accessories. Built for a long life, this tool includes helical gearing, all ball and roller bearings and an aluminum gear case with protective urethane bumpers. U.S.A. Speed (RPM): 1, 750, Amps: 11, Disc Diameter (in.): 7 or 9, Wheel Diameter (in.): 7/9, Tool Length (in.): 16 1/2, Tool Weight (lbs.): 8.8 Self-stopping long-life brush system Spring-loaded spindle lock for easy backing pad changes Lightweight for use with standard liquid polishes Balanced, powerful and rugged [Read more]
Brand: Milwaukee
|
|
FREE SHIPPING Milwaukee Polisher 11 Amp, 1750 RPM, 9in. Pad Size, Model# 5460-6
Exclusive Milwaukee electronics provides speed control in this powerful 11 amp polisher. A spindle lock provides convenient accessory changes. Milwaukees exclusive Quik-Lok cord provides instant field replacement for damaged cords. This polisher, when used with the foam pad accessories, is ideal for the clear coat finishes of todays cars. The combination is designed specifically to run cooler and reduce swirl marks. USA. Speed (RPM): 0 - 1, 750, Amps: 11, Variable Speed: Yes, Disc Diameter (in.): 7 or 9, OPM: 0 - 1, 750 Exclusive electronic dial speed control; ideal for use on clearcoat finishes Self-stopping long-life brush system Lightweight for use with standard liquid polishes Balanced, powerful and rugged [Read more]
Brand: Milwaukee
|
FREE SHIPPING Milwaukee Electric Polisher 11 Amp, 7in. Pad, Model# 5540
Milwaukee Polishers are built for the professional, with a powerful motor to maintain the right speed. Built for a long life, this tool includes helical gearing, all ball and roller bearings and an aluminum gear case with protective urethane bumpers. U.S.A. Speed (RPM): 0 - 2, 800, Amps: 11, Disc Diameter (in.): 7 Exclusive electronic dial speed control; ideal for use on clearcoat finishes Self-stopping long-life brush system Lightweight for use with high-speed liquid machine polishes Balanced, powerful and rugged [Read more]
Brand: Milwaukee
|
FREE SHIPPING Northern Industrial Tools Sander/Polisher: 11 Amp, 7in. Pad, Model# NTE1711B
This adaptable sander/polisher has variable speed settings and a variety of attachments for a wide range of uses. Speed (RPM): 1, 000 - 3, 000, Amps: 11, Variable Speed: Yes, Disc Diameter (in.): 7 5/8in.-11 spindle with lock for quick changes Die-cast aluminum gear housing Hook and loop system accepts all standard 7in. sanding and polishing accessories Includes pro-quality polishing pad & wrench, hook & loop backer pad and sandpaper disc [Read more]
Brand: Northern Industrial Tools
|
Craftsman 10 in. Buffer/Polisher
10 in. buffer/polisher with 3 pc. foam pad. Rear handle with full front contour and lock-on button. 3 terry-cloth, 3 applicator, 1 polishing bonnet. 1 hand applicator pad, 5 gal. bucket w/wrap. [Read more]
Brand: Craftsman
|
|
Norton Body File Sheets For Straight Line Air Sander, Item# 15772 5 Pk., 180 Grit
2 3/4in. x 17 1/2in. clip-on file sheets for use with Item# 15772, 16in. Straight Line Air Sander. U.S.A. Grit: 180, Sheet Size (in. x in.): 2 3/4 x 17 1/2, Sheets (qty.): 5 180-grit file sheets U.S.A. [Read more]
Brand: Norton
|
FREE SHIPPING Makita Belt Sander 6.7 Amp, 3in. x 21in. Belt Size, Model# 9901
This belt sander has a powerful 6.7 Amp motor that delivers a belt speed of 1246 feet per minute for fast stock removal. Compact, lightweight and well-balanced for easy operation, the sander has an easy-release lever for quick belt changes and easy belt adjustments. Amps: 6.7, Belt Size (in. x in.): 3 x 21, Belt Speed (ft./min.): 1, 246, Dust Bag Included: Yes Double insulated Replaceable ceramic wear plate Ball-bearing construction reduces vibration Includes abrasive belt [Read more]
Brand: Makita
|
FREE SHIPPING Makita Sander and Polisher 10 Amp, 3000 RPM, 7in. Disc Size, Model# 9227CX3
This polisher is fast and powerful for clear coat finishes and excellent for slow polishing, too. Variable speed feature (600-3000 RPM) gives maximum control for buffing. Converts to sander in a snap. Speed (RPM): 0 - 3, 000, Amps: 10, Variable Speed: Yes, Disc Diameter (in.): 7, Tool Length (in.): 18 1/2 Soft start feature for smooth start ups Lock-on button for continuous use 115V Includes hook-and-loop pad and hex wrench Shown with optional buffing bonnet (not included, sold separately) Ideal for ultra slow polishing Electronic speed control maintains constant speed under load Easily converts to a sander 3 prong plug to prevent static electricity accumulation Fast and powerful polishing for clearcoat finishes Wool bonnet 7 in. Spindle thread 5/8 in. - 11 UNC [Read more]
Brand: Makita
|
FREE SHIPPING Makita Random Orbital Sander 2 Amp, 5in. Disc Size, Model# BO5012K
USA Amps: 2, Variable Speed: Yes, Disc Diameter (in.): 5, OPM: 4, 000 - 12, 000, Case Included: Yes, Dust Bag Included: Yes Dust bag adjusts 360 to keep out of the way Efficient through-the-pad dust collection system Pad brake stops motor after power switch is turned off Attaches to a vacuum hose for better dust control 1/8in. orbit action for swirl-free finish [Read more]
Brand: Makita
|
|
Ingersoll Rand Twin Piston Straight Line Air Sander, Model# 315
Twin pistons prevent stalling and provide you with smooth, reliable power. Long 2 3/4in. x 17 1/2in.. pad gives you accurate shaping and precise leveling of flat surfaces. 3000 reciprocating 1-inch strokes per minute save you time. Comfortable, balanced 2-handle design produces a smooth, vibration-free performance. Automatic stop trigger release. Quick action sandpaper clamps. Air Consumption (CFM): 8, CFM at Load: 9, Speed (RPM): 3, 000, Pad Diameter (in.): 2 3/4 x 17 1/2, Spindle Size (in.): 16.8, Random Orbital: No, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No, Tool Weight (lbs.): 6 1/4 [Read more]
Brand: Ingersoll Rand
|
Ingersoll Rand Vacuum-Ready Random Orbital Sander Model# 300G
The Ingersoll Rand Vacuum-Ready Random Orbital Sander is ideal for high-quality finish in autobody and woodworking and produces a swirl-free finish. Air Consumption (CFM): 8, CFM at Load: 15.5, Speed (RPM): 10, 000, Pad Diameter (in.): 6, Spindle Size (in.): 8, Random Orbital: Yes, Variable Speed: Yes, Side Handle: No, Vacuum Ready: Yes, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 5/16, Case Included: No Ideal for high-quality finish in autobody and woodworking 1/5 HP motor Produces swirl-free finish Lightweight, low vibration composite design Contoured grip Includes 360 swivel vacuum adapter that provides greater range of movement without tangled hoses and cords [Read more]
Brand: Ingersoll Rand
|
Ingersoll Rand Dual Action Sander Model# 311G
The Ingersoll Rand Dual Action Sander is an economical solution for body shop and metal or wood preparation. Air Consumption (CFM): 4, CFM at Load: 17, Speed (RPM): 10, 000, Pad Diameter (in.): 6, Random Orbital: No, Variable Speed: Yes, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No Economical solution for body shop and metal/wood preparation Built-in power regulator Handle control design 1/4 HP motor [Read more]
Brand: Ingersoll Rand
|
Ingersoll Rand Air Orbital Sander 6in. Dia, 8 CFM, 12, 000 RPM, Model# 4151-2
This Ingersoll Rand air orbital sander is vacuum-ready and produces an ultra high-quality, swirl-free finishes. Air Consumption (CFM): 8, CFM at Load: 15.5, Speed (RPM): 12, 000, Pad Diameter (in.): 6, Spindle Size (in.): 6, Random Orbital: Yes, Side Handle: No, Vacuum Ready: Conversion Kit Required, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 5/16, Case Included: No, Tool Weight (lbs.): 1.92 Extra-long handle for those who prefer two-handed sanding 1/5 HP motor [Read more]
Brand: Ingersoll Rand
|
|
Ingersoll Rand Angle Air Sander 7in. Dia. Pad, 8 CFM, 5000 RPM, Model# 313
This Ingersoll Rand angle air sander lets you work faster on light- and heavy-duty sanding jobs, including roughing body filler, removing rust and smoothing welds. Air Consumption (CFM): 8, CFM at Load: 23, Speed (RPM): 5, 000, Pad Diameter (in.): 7, Spindle Size (in.): 5/8 x 11, Random Orbital: No, Side Handle: Yes, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No, Tool Weight (lbs.): 4.2 Heavy-duty motor Lightweight Ball-bearing construction for long life [Read more]
Brand: Ingersoll Rand
|
FREE SHIPPING Wel-Bilt Palm Sander
Single-speed palm sander removes paint and fine-finishes woodcraft projects. Accepts 1/4-sheet sandpaper. Dust and debris is collected through the pad and deposited into a bag for nearly dust-free sanding. Palm grip for maximum comfort and control. Includes 100-grit sandpaper and dust bag. Not related to WELBILT products of Enodis companies. Speed (RPM): 14, 000, Amps: 1.5, Dust Bag Included: Yes Accepts 1/4-sheet sandpaper Dust and debris collected through pad Includes 100-grit sandpaper and dust bag [Read more]
Brand: Wel-Bilt
|
Northern Industrial Straight Line Air Sander 16in. Size, 8 CFM, 90 PSI
3, 300 strokes per minute. 2 3/4in. x 15 3/4in. pad size. 8 CFM air consumption, 1in. stroke length. 90 PSI, 1/4in. inlet. Air Consumption (CFM): 8, Speed (RPM): 3, 300, Pad Diameter (in.): 2 3/4 x 15 3/4, Random Orbital: No, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No 1in. stroke length 90 PSI [Read more]
Brand: Northern Industrial Tools
|
Northern Industrial Air Random Orbital Sander 5in. Dia, 9 CFM, 10, 000 RPM
Great features and a great price make this air sander a good addition to your air tool collection. Unique ergonomic design and rubber overmold create an excellent non-slip feel, while the rubber coating insulates from the cold. Composite body is lightweight yet durable, and the hardened steel alloy cylinders extend the life of the tool. Vibration-absorbing rubber rings minimize vibration. The muffling system reduces noise levels to as low as 78 dB. The innovative anti-dust protection system insulates the air motor and bearings from sanding residue and eliminates contamination. Air Consumption (CFM): 9, Speed (RPM): 10, 000, Pad Diameter (in.): 5, Spindle Size (in.): 5/16 x 24 UNF, Random Orbital: Yes, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No Fine-finish 5mm orbit pattern Uses velcro pads Low vibration for swirl-free finishes 5-blade rotor [Read more]
Brand: Northern Industrial Tools
|
|
Ingersoll Rand Hook & Loop Random Orbital Sander 6In. Dia., 8 CFM, 12, 000 RPM, Model# 4152-HL
This Ingersoll Rand random orbital sanders provides great features and a great price, making this hook & loop random orbital sander a must have for your air tool collection. Air Consumption (CFM): 8, CFM at Load: 15.5, Speed (RPM): 12, 000, Pad Diameter (in.): 6, Variable Speed: Yes, Vacuum Ready: Yes, Air Inlet Size (in. NPT): 1/4 Fine-finish 2.5mm orbit pattern Vacuum ready Directional exhaust muffler Precision ground internal counterbalance prevents excessive vibration Lightweight composite body with rubber ergonomic grip Lubrication-free motor [Read more]
Brand: Ingersoll Rand
|
Northern Industrial Dual Action Air Disc Sander 6in. Dia, 4 CFM, 90 PSI, 7000 RPM
Use as a rotary OR orbital action sander by just setting the eccentric lockout! Air Consumption (CFM): 4, CFM at Load: 3, Speed (RPM): 7, 000, Pad Diameter (in.): 5.5, Random Orbital: Yes, Variable Speed: Yes, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No Built-in speed regulator QUIET motor insulation [Read more]
Brand: Northern Industrial Tools
|
Ingersoll Rand Dual Action Air Sander 6in. Dia, 4 CFM, 10, 000 RPM, Model# 311A
This Ingersoll Rand dual action air sander features a built-in silencer that muffles noise as you work. Its an ideal choice for feather edging, metal preparation and finish work on body filler. Air Consumption (CFM): 4, CFM at Load: 17, Speed (RPM): 10, 000, Pad Diameter (in.): 6, Random Orbital: No, Variable Speed: Yes, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No Quiet, insulated motor Vibration free Balanced ball bearing construction Adjustable, built-in regulator for positive speed control 1/4 HP [Read more]
Brand: Ingersoll Rand
|
Ingersoll Rand Vacuum-Ready Random Orbital Air Sander 6In. Dia., 8 CFM, 12, 000 RPM, Model# 4152
This Ingersoll Rand vacuum-ready random orbital air sander combines a variety of great features and a great price to set a new standard in automotive finish work. Air Consumption (CFM): 8, CFM at Load: 15.5, Speed (RPM): 12, 000, Pad Diameter (in.): 6, Spindle Size (in.): 8, Random Orbital: Yes, Variable Speed: Yes, Side Handle: No, Vacuum Ready: Yes, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No Fine-finish 2.5mm orbit pattern Directional exhaust muffler Precision ground internal counterbalance prevents excessive vibration Lightweight composite body with rubber ergonomic grip Lubrication-free motor [Read more]
Brand: Ingersoll Rand
|
|
Ingersoll Rand Air Disc Sander 5in. Dia, 6 CFM, 18, 000 RPM, Model# 317A
This Ingersoll Rand air disc sander is designed for small jobs and hard-to-reach places. Air Consumption (CFM): 6, CFM at Load: 21, Speed (RPM): 18, 000, Pad Diameter (in.): 3, 4 and 5, Spindle Size (in.): 5/8 x 11, Random Orbital: No, Variable Speed: Yes, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No For small and hard-to-reach jobs, light sanding, feather edging and rust removal Easy to handle Compact and lightweight Built-in power regulator [Read more]
Brand: Ingersoll Rand
|
Ingersoll Rand Vertical Air Sander 7in. Dia, 6 CFM, 5000 RPM, Model# 319
This Ingersoll Rand vertical air sander is built to handle demanding jobs. Air Consumption (CFM): 6, CFM at Load: 20, Speed (RPM): 5, 000, Pad Diameter (in.): 7, Spindle Size (in.): 5/8 x 11, Random Orbital: No, Variable Speed: Yes, Side Handle: Yes, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No, Tool Weight (lbs.): 4.5 Longer gear life plus better gearing for better power Handle exhaust Planetary gear reduction features lever throttle for speed control [Read more]
Brand: Ingersoll Rand
|
Ingersoll Rand Air Random Orbital Sander 5in. Dia, 8 CFM, 12, 000 RPM, Model# 4151-5
This Ingersoll Rand vacuum-ready, low-vibration orbital sander produces an ultra high-quality finish and connects easily to central or portable vacuum systems. U.S.A. Air Consumption (CFM): 8, CFM at Load: 15.5, Speed (RPM): 12, 000, Pad Diameter (in.): 5, Spindle Size (in.): 8.2, Random Orbital: Yes, Variable Speed: Yes, Side Handle: No, Vacuum Ready: Yes, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 5/16, Case Included: No, Tool Weight (lbs.): 1.92 .2 HP, lubrication-free motor 360 swivel rear exhaust Oil-free operation Extracts dust and particles through and around pad Features a unique design with 1/2in. holes for efficient operation Virtually all dust is instantly channeled away from the work [Read more]
Brand: Ingersoll Rand
|
Northern Industrial Air Orbital Sander 6 CFM, 90 PSI, 6000 RPM
Jitterbug air sander. 3 5/8in. x 6 1/2in. sander has constant 3/16in. orbit for fine finishing. Very versatile, can be operated with one hand. 6 CFM air consumption @ 90 PSI. Air Consumption (CFM): 6, Speed (RPM): 6, 000, Pad Diameter (in.): 3 5/8 x 6 1/2, Random Orbital: Yes, Variable Speed: Yes, Side Handle: No, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No Built in regulator Quiet muffled rear exhaust Steel plates for long tool life Positive paper retention [Read more]
Brand: Northern Industrial Tools
|
|
Northern Industrial Horizontal Air Sander 7in. Dia, 5.3 CFM, 90 PSI, 4500 RPM
4, 500 RPM with built-in regulator. Vibration-free ball bearing construction. Side handle fits on either side. Complete with 7in. pad. 1/4in. air inlet, 90 PSI working pressure. 5.3 CFM. 16in. long. Air Consumption (CFM): 5.3, Speed (RPM): 4, 500, Pad Diameter (in.): 7, Spindle Size (in.): 5/8 x 11, Random Orbital: No, Variable Speed: Yes, Side Handle: Yes, Vacuum Ready: No, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Case Included: No, Tool Length (in.): 16 Built-in regulator Vibration-free ball bearing construction [Read more]
Brand: Northern Industrial Tools
|
FREE SHIPPING Makita Belt Sander 5 Amp, 1 1/8in. x 21in. Belt Size, Model# 9031
This belt sander is compact and lightweight for use in close quarters. Belt speed can vary from 656 to 3280 feet per minute for use on many surfaces. Narrow belt and exposed front pulley lets you sand in confined spaces or on irregular shapes. Amps: 5, Variable Speed: Yes, Belt Size (in. x in.): 1 1/8 x 21, Belt Speed (ft./min.): 656 - 3, 280 Ball and needle bearing construction Narrow belt and exposed front pulley for close quarters Multi-position side handle for easy operation Lock-on button for continuous use Double insulated Includes 10 sanding belts [Read more]
Brand: Makita
|
FREE SHIPPING Makita Belt Sander 11 Amp, 4in. x 24in. Belt Size, Model# 9403
This powerful belt sander features an extended base to allow flush sanding to walls. The wide belt removes material quickly for high production. And its quiet, only generating 84dB in use. Amps: 11, Belt Size (in. x in.): 4 x 24, Noise Level (dB): 84, Dust Bag Included: Yes Low profile for balance and less gouging Large front grip for operator comfort Extended base allows flush sanding Replaceable ceramic wear plate Lever control for easy belt changes Double insulated Dust bag swivels 360 Includes 1 sanding belt [Read more]
Brand: Makita
|
FREE SHIPPING Makita Belt Sander 8.8 Amp, 4in. x 24in. Belt Size, Model# 9404
This belt sander is the quietest in its class only 84dB. Preset the maximum belt speed with the electronic speed control and get variable speeds from 690 to 1440 ft. per minute. Unique design lets you sand flush to corners and walls. Amps: 8.8, Variable Speed: Yes, Belt Size (in. x in.): 4 x 24, Belt Speed (ft./min.): 690 - 1, 440, Noise Level (dB): 84, Dust Bag Included: Yes Sands flush to corner of wall with nose and side of sander 16.4-foot power cord Auto-tracking belt system Double insulated Includes 1 sanding belt [Read more]
Brand: Makita
|
|
FREE SHIPPING Makita Wheel Sander 7.8 Amp, 3500 RPM, 4 3/4in. x 4in. Wheel Size, Model# 9741
This wheel sanders unique design allows for smooth and even surface material removal. Powered by Makitas 7.8 Amp motor, this unit delivers 3500 RPM for efficient paint and rust removal on numerous applications, even brining out wood grain. Features an adjustable front roller for uniform pressure to workpiece. Speed (RPM): 3, 500, Amps: 7.8 Electric brake for fast stopping of wheel Well-balanced for low center of gravity Includes nylon brush wheel and hex wrenches [Read more]
Brand: Makita
|
Norton Body File Sheets For Straight Line Air Sander, Item# 15772 150 Grit, 5-Pk.
2 3/4in. x 17 1/2in. clip-on file sheets for use with Item# 15772, 16in. Straight Line Air Sander. U.S.A. Grit: 150, Sheet Size (in. x in.): 2 3/4 x 17 1/2, Sheets (qty.): 5 150-grit file sheets [Read more]
Brand: Norton
|
FREE SHIPPING Makita Belt Sander 5.6 Amp, 3in. x 18in. Belt Size, Model# 9910
This belt sander has a powerful 5.6 Amp motor that delivers a belt speed of 900 feet per minute for fast stock removal. Compact, lightweight and well-balanced for easy operation, its unique design allows for flush sanding to a wall. Automatic belt adjustment requires no adjustment after installing belt. Low noise of only 82dB is easy on the ears. Flat-top design allows sander to be turned and used as a benchtop tool. Features a superior dust collection system. Amps: 5.6, Belt Size (in. x in.): 3 x 18, Belt Speed (ft./min.): 900, Noise Level (dB): 83, Dust Bag Included: Yes Double insulated Includes abrasive belt [Read more]
Brand: Makita
|
FREE SHIPPING Makita Belt Sander 5.6 Amp, 3in. x 18in. Belt Size, Model# 9911
This belt sander has a powerful 5.6 Amp motor that can deliver belt speeds of 250 to 900 feet per minute for fast yet controlled stock removal. Compact, lightweight and well-balanced for easy operation, its unique design allows for flush sanding to a wall. Automatic belt adjustment requires no adjustment after installing belt. Low noise of only 82dB is easy on the ears. Flat-top design allows sander to be turned and used as a benchtop tool. Features a superior dust collection system. Amps: 5.6, Variable Speed: Yes, Belt Size (in. x in.): 3 x 18, Belt Speed (ft./min.): 250 - 900, Noise Level (dB): 82, Dust Bag Included: Yes Double insulated Includes abrasive belt [Read more]
Brand: Makita
|
|
Chicago Pneumatic CP7200SKIT Dual Action Mini Random Orbital Air Sander Kit
The Chicago Pneumatic CP7200SKIT is a Mini Random Dual Action Orbital Sander Kit. It is compact and lightweight which helps for easy access in tight areas and also has a rubber molded palm grip for added comfort. The Sander has an adjustable power regulator, its two finger throttle makes it easier to control and ensures a reduced amount of fatigue. The tool also has a silenced handle exhaust that directs air away from work area.Features:Compact and lightweight dessign allows for easy access in tight areasRubber molded palm grip for added comfort and controlAdjustable power regulator ensures precision resultsTwo finger throttle for increased control and less fatigueHandle exhaust port reduces noise and directs air away from work areaWhats In The Box:Chicago Pneumatic CP7200S Dual Action Mini Random Orbital Pneumatic SanderOne Each 2-Inch and 3-Inch Backing PadsTen Each 2-Inch 320, 400 and 600 Grit Sand PaperTen Each 3-Inch 300, 320, 400 and 600 Grit Sand PaperSpindle Wrench PackedHeavy Duty Plastic Carrying Case [Read more]
Brand: Chicago Pneumatic
|
Jet 708404 JBOS-5 Benchtop Oscillating Spindle Sander
Jet 708404 JBOS-5 Benchtop Oscillating Spindle Sander [Read more]
Brand: Jet
|
Electric Palm Sander
ELECTRIC PALM SANDER This Electric Palm Sander makes your body work and refinishing jobs a lot easier It's lightweight (just over 2-lbs.) and ergonomically shaped to fit comfortably in the palm of your hand Quick-change release lever lets you change sandpaper in a snap Uses 1/4 sheet of sandpaper (not included). The 1-amp, 120-watt motor develops 11, 000 RPM. Easy-access on/off switch. Includes 6-ft. cord. UL listed. 120V [Read more]
Brand: Buffalo Tools Stk
|
6"""" Dual Action Disc Sander
6"""" DUAL ACTION DISC SANDER Rotary action assures smooth and circulating sanding while the orbital sander provides a patternless finish! Swivel free finishes from the dual action motion pad Built-in regulator for positive speed control This sander is perfect for feather edging, metal preparation and blending body filler. Sander features air consumption of 6 cfm, 6"""" pad, 10, 000 rpm, 90 PSI and a 1/4"""" air inlet. [Read more]
Brand: Wilmar Corp Stk
|
|
Sanding Belt 6" x 118" 150 Grit
Fits KSM 3000 Edge Sander. [Read more]
|
Sanding Belt 6" x 118" 80 Grit
Fits KSM 3000 Edge Sander. [Read more]
|
Sanding Belt 6" x 99" 100 Grit
Fits Platinum Series Oscillating Edge Sander. [Read more]
|
6'' Stickit Gold P320 Grade Sanding Discs - 75 Disc Roll
? Durable and longer lasting disc product. ? Discs have pressure-sensitive adhesive for easy application and removal. By 3M Automotive Products. [Read more]
|
|
Professional Quality Sanding Board
Features low silhouette paper clamps of tempered steel for easy loading and taut abrasives. ? Model PF-16. Nearly indestructible Cycolac plastic for flexibility and long life. Flat surfaces or curves. Wet or dry sanding. Uses standard 2-3/4'' x 17-1/2'' sandpaper.By Hutchins. [Read more]
|
6'' Stickit Gold P220 Grade Sanding Discs- 75 Disc Roll
? Durable and longer lasting disc product. ? Discs have pressure-sensitive adhesive for easy application and removal. By 3M Automotive Products. [Read more]
|
5'' Sanding Block
Uses standard 3'' x 8'' sandpaper. Easy to affix paper to steel spikes molded into block. Holds paper securely. Use with wet or dry sandpaper on flat or curved surface.By Tool Aid. [Read more]
|
6'' Stickit Green Fre-Cut 80D Grade Sanding Discs- 100 Disc Roll
? 100 discs, 80D grade ? Durable and longer lasting disc product ? Discs have pressure-sensitive adhesive for easy application and removalBy 3M Automotive Products. [Read more]
|
|
Dual Action Mini Air Sanding & Polishing Kit
Kit Includes: ? Pistol grip dual action sander/polisher tool - 2800 - 13, 000RPM ? 3'' backup pad ? 1-1/2'' velcro holder ? 1-1/2'' sanding pad ? 3'' polishing foam pad ? (2) 3'' 400 grit sanding discs ? (2) 3'' 600 grit sanding discs ? (2) 3'' 1000 grit sanding discs ? (10) 1-1/2'' 2000 grit sanding discs ? Spanner wrenchModel Number 3050 By Astro Pneumatic. [Read more]
|
3M Softback Sanding Sponge Sheets 360 Grade
? Flexible abrasive coated foam sheets? Enable users to sand hard-to-reach areas? Help eliminate finger marks? Can be used wet or dry? Ultrafine ? 360 Grade [Read more]
|
Northern Industrial Mini Polisher and Sander Kit 15, 000 RPM
This polisher/sander kit includes everything needed for basic sanding and polishing projects. CFM at Load: 4, Speed (RPM): 15, 000, Pad Diameter (in.): 3/2, Air Inlet Size (in. NPT): 1/4 15, 000 RPM, 3mm orbit angle sander 4 CFM 1/4in. inlet 3in. and 2in. pads Lock pin tool Sandpaper Wool polishing pad [Read more]
Brand: Northern Industrial Tools
|
DEWALT Heavy-Duty Electric Variable Speed Polisher 7in./9in., Model# DW849
Item is on backorder until February 10th. Speed (RPM): 3, 000, Amps: 8, Variable Speed: Yes, Disc Diameter (in.): 7 or 9, OPM: 0 - 3, 000 1400 Watt all ball bearing construction Electronic module maintains specified speed even under load Heat-treated, precision-cut gears for smooth operation External brush caps for easy servicing 5/8in.-11 spindle thread Spindle lock for easy pad changing Includes 2-position side handle, rubber backing pad and clamp nut [Read more]
Brand: Dewalt
|
|
DEWALT 7in./9in. Heavy Duty Polisher, Model# DW847
Variable speed polisher has 0-1750 RPM no load speed and 120 AC Volts Speed (RPM): 1, 750, Amps: 7, Variable Speed: Yes, Disc Diameter (in.): 7 or 9 [Read more]
Brand: Dewalt
|
6'' Stickit Gold P180 Grade Sanding Discs- 75 Disc Roll
? Durable and longer lasting disc product. ? Discs have pressure-sensitive adhesive for easy application and removal. By 3M Automotive Products. [Read more]
|
6'' Stickit Gold P80 Grade Sanding Discs- 75 Disc Roll
? Durable and longer lasting disc product. ? Discs have pressure-sensitive adhesive for easy application and removal. By 3M Automotive Products. [Read more]
|
Sanding Belt 6" x 118" 120 Grit
Fits KSM 3000 Edge Sander. [Read more]
|
|
Sanding Belt 6" x 118" 60 Grit
Fits KSM 3000 Edge Sander. [Read more]
|
Sanding Belt 6" x 118" 100 Grit
Fits KSM 3000 Edge Sander. [Read more]
|
Drum Sanding Roll 3" x 95" 80 Grit
Fits Platinum Series 16/32 Drum Sander. [Read more]
|
Sanding Belt 6" x 99" 220 Grit
Fits Platinum Series Oscillating Edge Sander. [Read more]
|
|
12" Sanding Disk 80 Grit
Fits Platinum Series 12" Disk Sander. [Read more]
|
12" Sanding Disk 100 Grit
Fits Platinum Series 12" Disk Sander. [Read more]
|
Sanding Belt 6" x 118" 220 Grit
Fits KSM 3000 Edge Sander. [Read more]
|
20" Sanding Disk 150 Grit
20" Sanding Disk for Platinum Series 20" Disk Sander with Stand. [Read more]
|
|
Drum Sanding Roll 3" x 95" 150 Grit
Fits Platinum Series 16/32 Drum Sander. [Read more]
|
20" Sanding Disk 120 Grit
20" Sanding Disk for Platinum Series 20" Disk Sander with Stand. [Read more]
|
20" Sanding Disk 100 Grit
20" Sanding Disk for Platinum Series 20" Disk Sander with Stand. [Read more]
|
Drum Sanding Roll 3" x 95" 120 Grit
Fits Platinum Series 16/32 Drum Sander. [Read more]
|
|
Sanding Belt 6" x 99" 400 Grit
Fits Platinum Series Oscillating Edge Sander. [Read more]
|
Sanding Belt 6" x 99" 280 Grit
Fits Platinum Series Oscillating Edge Sander. [Read more]
|
Sanding Belt 6" x 99" 150 Grit
Fits Platinum Series Oscillating Edge Sander. [Read more]
|
Sanding Belt 6" x 99" 120 Grid
Fits Platinum Series Oscillating Edge Sander. [Read more]
|
|
|
|
|
| |
|
Keywords: lijadora, pulidora, tronzado, tronzar, discos de corte, mesa de tronzar, desbastado, discos de desbaste, vasos de amolar, lijado, discos de láminas fijas, cepillado, cepillos de copa, cepillos de disco, pulido, boina pulidora, disco de corte, abrasivos
|
